内置了多个预设的燃油调整图,用于sp Mukawa发动机部件!
在电脑上安装 "spTUKAWA专用软件 "或在智能手机上安装 "spTUKAWA专用应用程序",可根据发动机规格设置详细的燃油调节图。
但是,如果没有燃油调整图作为基础,设置起来就很困难,也很费时,因为它需要有底盘测功机和O2传感器的设施。
fi-con type-e根据`sp竹川发动机的规格预设了几种燃油调节图,如原厂发动机配运动凸轮轴或138cc s级增缸套件。
如果您的车安装了spTakekawa产品,只需安装 "fi-con type-e",选择 "内置燃油调节图 "即可完成设置。
另外,即使您的车上安装了其他厂家的消声器,只要选择配备 "spTakekawa产品 "的汽车的内置燃油调节图,就可以顺利地调整设置。
你可以把它安装到正版的ecu上,只需一个耦合器就可以了。
由于控制器采用的是与正版ecu相对应的耦合器,所以根本不需要进行任何接线处理,只要打开耦合器就可以轻松安装到正版ecu上。
喷油时间调整功能
喷油时间调整功能
每500转/分钟,节气门位置的5%,可以在最大增益5000μs和最大损失7500μs之间调整。
这就是为什么我们可以处理从原厂发动机到无聊车辆的各种车辆。
实时监控功能与发动机温度显示
安装在电脑或智能手机上的sp竹川软件(智能手机:应用程序)具有实时监控功能,对设置发动机非常有用。
实时监控功能数字化显示 "转速表画面"、"节气门开度图画面"、"发动机温度"、"喷油器喷油速度"。
转速表`tps(节气门位置传感器)开度监测仪`在发动机运转时实时显示发动机温度。
真实搜索功能
真实搜索功能
允许您在引擎引导的同时,连接PC或智能手机。发动机的运行信息会实时反映在电脑或智能手机的屏幕上。
"真实搜索功能 "在 "燃油地图 "上反映出转速和节气门位置的读数,并通过点亮图形上的方块,使调整点更加清晰。
这是一个非常有用的设置功能。
转速限制功能
可设定发动机转速的上限。它是一个独立于限位器的功能,可以在低速时进行设置。
当你不想提高发动机的转速时,例如不想提高调校发动机的转速或想磨合发动机时,可以使用这个功能。
数字加速泵功能
fi-con type-e接收tps(节气门位置传感器)信号并监测加速器位置的速度。
比如当油门开得过早时,系统会判断骑手需要快速加速,除了增加喷油量外,还会在油门打开的瞬间进行异步喷油。
(可以设置成和赛车化油器的加速泵一样的工作方式)
坑道限速功能
除了转速限制功能外,如果在赛道等坑道内不想提高发动机转速,可以利用装置螺旋管内的白线。只有当开关接通时,将开关与 "本体接地 "连接,才能启动限位器。
包含转速表输出检修线
转速表螺旋管中的紫色线每转一圈,每脉冲输出5伏电压。将电动转速表的脉冲线与之相连,就可以测量`发动机转速。
我公司生产的通用型转速表已确认运行
中型dn转速表(05-05-3210)
φ48小dn转速表(橙色)(05-05-0016)
φ48小dn转速表(白色)(05-05-0016)0035)
中型液晶转速表(05-05-0028)
蓝色led转速表(05-05-0004)
黑绿转速表(05-05-0014)
Sp竹川通用,不能安装。转速表
无法正常工作。
超级多功能仪表(05-05-0811)
大型液晶阿尔法转速表(09-01-0057)
中型液晶阿尔法转速表和温度表(09-05-0144)
注意事项
fi-con型-。使用本服务需要符合以下要求的电脑或智能手机。如果您不具备以下条件,就不能使用本服务。
您必须连接到互联网才能下载软件和应用程序。的情况下,你将不得不为其付费。请注意,情况并非如此。
■fi-con type-e系统要求
适用于PC机
目标操作系统:windows 7/8/10(不含rt/mobile)
安装spMukawa(免费)软件需要连接互联网
。电脑必须内置蓝牙,或者必须使用外置蓝牙适配器。
适用于智能手机
适用于iphone4s或更高版本,iPad第3代或更高版本,ios8或更高版本
SpTakekawa应用程序(付费)需要连接到 "appstore "才能安装。
目标:andoroid`andoroid设备
内置蓝牙4.2.2或更高版本
SpTakekawa应用程序(付费)需要连接到`google play`才能安装。
■Multiple built-in fuel adjustment maps that have been set to match the SP Takegawa engine parts!!!
By installing SP Takegawa dedicated software on your PC or SP Takegawa dedicated application on your smart phone, you can set up a detailed fuel adjustment map according to your engine specification.
However, the setting is difficult and time consuming without a base fuel adjustment map because it requires a facility equipped with a chassis dynamo meter and O2 sensor.
FI-CON TYPE-e has several pre-set fuel adjustment maps for SP Takekawa engine specifications such as stock engine with sports camshaft and S-stage big bore kit 138cc.
With this system, if your vehicle is equipped with SP Takegawa products, you can complete the setting by installing FI-CON TYPE-e and selecting the built-in fuel adjustment map.
Even if your vehicle is equipped with other company's products such as exhaust, you can choose the built-in fuel adjustment map of SP Takegawa products and make fine adjustment to make your vehicle setting smoothly.
■It can be installed to the stock ECU by coupler-on!!!
Because the coupler that corresponds to the stock ECU is adopted for the wiring of the controller, there is no need to modify the wiring at all, and it can be easily installed by coupler-on to the stock ECU.
■Fuel injection time adjustment function
It is possible to adjust the maximum increase value of 5000μs and the maximum decrease value of 7500μs at every 5% of accelerator opening and every 500rpm of engine speed.
Therefore, it is suitable for a wide range of vehicles from stock engines to vehicles with increased bore.
■Real-time monitor function with engine temperature display
SP Takegawa dedicated software installed on a PC or smartphone (smartphone: App) is equipped with a real-time monitor function which is very useful for setting.
The real-time monitoring function digitally displays the tachometer screen, throttle opening graph screen, engine temperature, and injector fuel injection rate.
You can check the tachometer, TPS (Throttle Position Sensor) opening degree monitor and engine temperature in real time when the engine is running.
■Real search function
It can be connected to a PC or a smart phone with the engine running.The information of the running engine is reflected on the screen of PC or smart phone in real time.
The Real Search function reflects the RPM and throttle position readings on the fuel map graph, and makes the adjustment points clear by illuminating those areas.
This is a very useful feature when setting up.
■Rev limit function
The upper limit of the engine speed can be set.This function is independent of the limiter, so it can be set at low rpm.
This function can be effectively used when you do not want to increase the engine speed, for example, to prevent revving of a tuned engine or to run-in the engine.
■Digital acceleration pump function
FI-CON TYPE-e takes in the TPS (Throttle Position Sensor) signal and monitors the speed of the accelerator opening.
When the accelerator pedal is opened quickly, the system judges that the rider wants quick acceleration and performs acceleration injection asynchronously in addition to the incremental injection set at the moment the accelerator pedal is opened.
(It can be set to work like the acceleration pump of a racing carburetor)
■Pit lane limiter function
In addition to the rev limiter function, when you don't want to increase the engine speed due to pit lane speed regulation on the circuit, you can connect the switch to the white wire in the spiral tube of the main unit and ground the body to activate the limiter only when the switch is on.
■Tachometer output service line included
The purple wire in the spiral tube of the unit outputs 5 volts per pulse per revolution.By connecting the pulse line of the electric tachometer to this, the engine speed can be measured.
■Operation-confirmed universal tachometer
Medium DN Tachometer (05-05-3210)
Φ48 Small DN Tachometer (Orange) (05-05-0016)
Φ48 Small DN Tachometer (White) (05-05-0035)
Medium LCD speedo & tachometer (05-05-0028)
Blue LED tachometer (05-05-0004)
Black & Green Tachometer (05-05-0014)
■SP Takegawa's universal tachometer that cannot be installed
It's not working properly.
Super Multi DN Meter (05-05-0811)
Large LCD Alpha Speed & Tachometer (09-01-0057)
Medium LCD Alpha Tachometer & Thermometer (09-05-0144)
■Cautions
When using FI CON TYPE-e, a PC or smart phone that meets the following conditions is required.If you do not have the following conditions, you cannot use this product.
You will also need to be connected to the Internet to download software and applications.In the case of an application, a fee is charged.
■FI Controller TYPE-e Operating Environment
For personal computers
Target OS: Windows 7 / 8 / 10 (except RT / MOBILE)
To install the SP Takegawa software (free of charge), you need to be connected to the Internet.
Your PC must have Bluetooth built-in, or you need an external Bluetooth adapter.
For Smartphones
Compatible: iPhone4s or later iPad 3rd generation or later iOS8 or later
To install SP Takegawa dedicated application (paid), you need to connect to AppStore.
Compatible: Andoroid, Andoroid device
Built-in Bluetooth version 4.2.2 or later
To install SP Takegawa app (paid), you need to connect to Google play.