它是一套加强的阀门弹簧,用于高旋转。
高凸轮轴·大阀头等。,即使它被设置为高速规格。在高速公转附近开始出现喘振,阀门开闭不牢固,高凸轮轴的作用正在减弱。
如果你执行限幅切割和执行高旋转类型的高凸轮轴·头调,浪涌极限立即出现,天花板将可见。
它是伴随高凸轮轴的高转速调谐不可缺少的部件。
阀弹簧的作用可以提高到更高的尺寸,通过避免风险,如避免阀和活塞在大旋转时因喘振而缓冲。
在advancedpro的测试中使用先进的cam’s high pcshaft,如果您使用advancedpro直结构高效排气系统对排气系统进行调优,我们将轻松超过10000 rpm。
This is a set of reinforced valve springs for high rpm.
Even if you use high camshaft, big valve head, etc. for high rpm, the effect of high camshaft is diminishing because surging is starting to occur at high rpm and the valve is not opening and closing properly.
When the limiter is cut and the high RPM type high cam head tuning is done, the surging limit comes immediately and the ceiling is seen.
This is an essential part for high RPM tuning with high camshafts.
The effect of the valve springs is to reduce the risk of damaging the engine due to surging and to avoid damaging the valves and pistons at high RPM.
In ADVANCEPro test, when using ADVANCEPro high camshafts and tuning the exhaust with ADVANCEPro straight structure high efficiency exhaust, the engine will easily exceed 10000rpm.