【制造商品编号】Q5K-YSK-085-J01
【安装工时】0.6h
这是在'mt-09 tracer（2017款）上安装qss（快速筛分系统）的套件，这是'mt-09（2017款）和'mt-10等车型的标准配置。
【QSS（快速筛分系统）】
QSS（快速筛分系统）是通过在换挡连杆上安装换挡开关，实现不松开离合器快速换挡的系统。
当换挡开关检测到升挡操作时，"ecu计算 "会立即修正发动机的输出功率，并取消啮合挡位的驱动力矩，以支持升挡。
虽然该系统最初是为赛车而开发的，因为它可以在不松开加速踏板和离合器的情况下进行换挡，但现在它也被用于公共道路，因为它可以减少疲劳。
为方便公共道路使用，本示踪产品有以下规格。
。只有当车速超过20公里/小时，发动机转速超过2000转/分，并且正在加速时，系统才会启动。
。只有在上移时才有效。不支持降档。
。当驾驶员握住离合器时，离合器没有被激活。
从mt-09 tracer(2017款)开始，`ecu和电表已经预接线，允许将开关作为改装选项安装。
*不适用于MT-09 tracer（2015和2016款）。 XSR900（2016款）。
*当安装在xsr900（2018款）上时，`支架。反射器(BS2-85132-00)`螺栓。需要法兰(95022-06025)`垫圈`板(90201-082p2)。
[Manufacturer's Parts Number] Q5K-YSK-085-J01
[Installation Duration] 0.6h
[Included Parts]
Bracket, Reflector (Parts Number: BS2-85132-00) x1pc.
Bolt, Flange (Parts Number: 95022-06025) x1pc.
Washer, Plate x 1
It is a kit that mounts QSS (Quick Sift System) which is equipped as standard on MT-09 (2017 model) and MT-10 etc. to MT-09 Tracer (2017 model).
[QSS (Quick Sift System)]
It is a system that installs a shift switch on the shift change link and enables a quick shift up without disengaging the clutch.
It corrects the engine output instantaneously by ECU operation, cancels the driving torque of the engaged gear, and supports shift up when the shift switch detects an upshift operation.
It is a system developed originally for racing but the adoption is also spreading to commercial vehicles because it can reduce fatigue in public road since it is possible to shift without releasing the accelerator and disengaging the clutch.
This product for tracer is woven into the following specifications considering convenience in public road use.
It operates only when the speed is 20 km/h or more, and the engine speed is over 2000 rpm, and the three conditions during acceleration are complete.
It operates only when upshifting operation. It does not correspond to shift down.
It does not work while holding the clutch.
It is prewired to connect the switch that correspond to ECU & meter so that it is possible to mount this switch as a retrofit option from MT-09 Tracer (2017 model).
*It is not mountable to MT-09 Tracer (2015-16 Model)/XSR900 (2016 Model).
*It requires bracket/reflector (BS2-85132-00), bolt/flange (95022-06025), washer, plate (90201-082P2) for XSR900 (2018 model).
