全款改款,规格可以从7种颜色和6种尺寸中选择最好的一款。
防雾罩。新的通风系统。超酷内饰等功能的加入,使其使用起来更加方便。
此外,可选择使用舒适衬垫和颊垫的不同组合,以达到最佳贴合效果。
从通勤到旅游,你可以期待在广泛的情况下使用它。
。全尺寸设置(xs-xxl的6个尺寸)*部分颜色不包括在内
。伸缩式直接通风
。光滑的内底形态,可顺利去除
。适合城市驾驶的柔软贴身内裤
。耳朵周围的扬声器空间
。标配了适用于所有天气条件的轻型防烟罩
。防雾盾牌,防止盾牌起雾
。盾牌支架,防止驾驶时盾牌的响声
。不锈钢一键式下巴带
【特点】
。通风系统
采用空气动力学设计,在头盔后部产生大面积进气孔和负压,使进气性能提高了+6%,排气性能提高了+51%(与上一代车型相比)。
。空气动力学设计
通过对骑行时头盔周围的气流进行深入分析,"升力阻力系数cl值(向上升力系数)"比传统模型降低了14%,"阻力阻力系数cd值(推力系数)"降低了3%。空气动力学设计通过控制风的流向,产生 "清空 "效应,对减少骑手疲劳做出了重要贡献。
【特色】
.雅马哈头盔首次采用防雾罩
雅马哈头盔首次采用防雾罩。防护罩上的特殊涂层覆盖面积广,能提供良好的视野和舒适的骑行环境。
。轻巧紧凑的帽身
纤细的帽身设计,尽量减少通风部件等突出部分,使其轻巧紧凑。
*根据滑板车存放空间的形状,在某些情况下可能无法存放滑板车。
。一键式搭扣下巴带
不锈钢一键式搭扣下巴带易于安装和拆卸,即使戴着骑行手套也可以。
。盾牌支架
盾牌支架可以防止驾驶时盾牌变形或晃动。
【内参】
.舒适内胆的选择。脸颊垫的最佳贴合度
根据用户的头型和喜好进行细节调整。舒适衬垫(单独出售)。您可以从 "标准型"、"紧型 "和 "松型 "三种不同类型的颊垫中选择。标准尺寸在销售时安装。让每一位顾客都能拥有舒适的最佳试穿效果。另外,接触皮肤的材质是超酷面料,速干性和抗菌性都很好,穿起来很舒服。
。采用眼镜缝隙。舒适贴合,即使是戴眼镜的人也能舒适贴合。
眼镜的缝隙可以使眼镜和太阳镜的佩戴顺畅,消除对镜架的压力。缝隙宽度大,可适用于从金属框架到钢框架的各种框架。
。平滑的可拆卸内形
内底形的大开口可拆卸头盔,使头盔顺利插入和拆卸。
。舒适的耳部空间
耳部区域的设计,让耳朵周围有更大的空间。
*扬声器的最大直径为50mm。
Fully remodeled with 7 colors and 6 sizes to choose the best one.
Anti-fog shield, new ventilation system, super cool interior, and other features have been added to make it easier to use.
In addition, various combinations of comfort liners and cheek pads (sold separately) can be used to achieve optimal fitting.
You can expect to be active in a wide range of scenes from commuting to touring.
・Full size setting (6 sizes from XS-XXL) *Except for some colors
・Open / Close type direct ventilation
・Smoothly removable inner bottom form
・Soft fit innerwear optimal for urban riding
・Speaker storage space around the ear
・Light smoke shield for all weather comes as standard equipment
・Anti-fog shield to prevent fogging of the shield
・Shield holder to prevent rattling of shield in riding
・Stainless steel one-touch chin strap
[Features]
・Ventilation system
The large intake hole and the aerodynamic design that generates negative pressure at the rear of the helmet have improved the intake performance by 6 percent and the exhaust performance by 51 percent (compared to the previous model).
・Aerodynamic design
By thoroughly analyzing the air flow around the helmet during driving, the lift coefficient CL (coefficient of force to lift upward) was reduced by 14% and the air resistance coefficient CD (coefficient of force to be pushed) was reduced by 3% compared with the conventional model.The aerodynamic design controls the flow of wind and has a rectifying effect, which greatly contributes to reducing rider fatigue.
[Function]
・Adoption of anti-fog shield
A special coating is applied to the inside of a shield to prevent fogging for the first time in YAMAHA helmets.Special coating is applied to a shield over a wide area to keep good visibility and realize comfortable riding environment.
・Lightweight and compact shell
The slim cap design and the minimization of protruding parts such as ventilation parts have resulted in a lightweight and compact cap.
*Storage in a scooter may not be used depending on the capacity and shape of the scooter's storage space.
・One-touch buckle chin strap
Stainless steel one-touch buckle chin strap for easy removal even when wearing riding gloves.
・Shield Holder
A shield holder is adopted to prevent deformation and rattling of a shield during driving.
[Interiors]
・Choice of comfort liner and cheek pads for optimal fitting
The shape of the user's head and the user's preferences are met in detail.The comfort liner and cheek pads (sold separately) can be individually adjusted in three ways: "standard", "tight" and "loose".The standard size is installed at the time of sale.It is available for each customer to have an optimal fitting for a comfortable fit.In addition, the fabric material that touches the skin, a comfortable fit is realized by adopting a super cool fabric with excellent quick-drying and antibacterial properties.
・Slits for glases is used.Comfortable fit for riders wearing glasses.
The eyeglass slit allows for smooth fitting of glasses and sunglasses and eliminates pressure on the frame.In addition, by setting the slit width wider, it is compatible with a wide range of glasses including metal and steel frames.
・Smoothly removable inner form
Smooth helmet detachability was realized by adopting inner bottom form that a detaching part becomes a large mouth shape.
・Ample space around the ears
It is designed with a space around the ear in advance to give more room around the ear.
*It can hold speakers with the diameter size upto Φ50mm.