重量(单边)：约280g(包含螺丝重量)
左右1组
【材质】
・铝合金盖：铝合金材质(A6061-T6)切削加工／阳极表面处理
・先端部：POM(聚甲醛树脂)
这是一个铝盖、绒球盖和黄铜砝码的杆端。
厚重的黄铜砝码能产生抑制震动的效果，减少操作过程中的不愉快震动。
铝盖采用高强度铝合金材料（a6061-t6）加工而成，并进行阳极氧化处理，防止表面变色和腐蚀，提高耐磨性，从而长期保持美观。
车头采用pom(聚氧乙烯)材质，摩擦系数低，在摔倒时对车体的伤害降到最低。
铝制和绒布套，在摔倒时可能会损坏，可单独购买。
*你的握力。请注意，根据车型的不同，可能需要用垫圈等进行调整。
*由于显示器的环境原因，图像的颜色可能与实际颜色略有不同。
※注：安装图片为影像，可能与产品颜色不同。
*本产品的价格和规格如有变更，恕不另行通知。
Weight (One Side): Approximately 280g (Weight including the bolt)
Quantity: Pair (for Left and Right)
[Material]
Aluminum Cover: Aluminum Alloy (A6061-T6) Cut-out/Anodized Finishing
Tip Part: POM (Polyoxymethylene)
It is a bar end combining aluminum cover, POM cover and brass weight.
It exerts vibration suppression effect by heavy brass weights and suppresses unpleasant vibration during operation.
The aluminum cover uses high strength aluminum alloy material (A6061-T6) and keeps beautiful appearance for a long time due to the anodized color which prevents discoloration and corrosion on the surface and improves wear resistance.
It minimizes damage to the vehicle body in the event of a fall because the tip is POM (polyoxymethylene) with a low coefficient of friction.
It is possible to purchase aluminum covers and POM covers separately and can be damaged when falling etc.
*Please note that it might require adjustment with the washer and etc. depending on the used grip and vehicle type.
*There are cases that the color of the product on the photo is slightly different from the actual product due to the setting of the monitor.
*NOTE: There are cases that the color of the product on the photo might be different from the actual product.
*There are cases that the price and specification of the product are subjected to change without prior notice.
