JMCA 排气管尾段
商品 # BF1210JM
海淘直邮价(不含运费&税费)
2,118.19 ~ RMB (44,332 日元)
定价 2,223.31 RMB 节省 最多 5%
+443~ Webike点数 (21.16 RMB)
当订单生成时,我们将确认制造商的库存并通过E-mail发送预计交货时间给您。
商品 # BF1210JM
海淘直邮价(不含运费&税费)
2,118.19 ~ RMB (44,332 日元)
定价 2,223.31 RMB 节省 最多 5%
+443~ Webike点数 (21.16 RMB)
加速器响应的改进`您所做的每一件事都将比以往更加顺畅。
在中心管前端采用锥形中心管(42.7→φ50锥形管),可以实现无压力吹扫。
中心管。消音器的内部结构完全专属于全新的cbr250r,消音器的风格更加动感,布局也更加时尚。
各种消音器所发出的音质,已经做到了温和舒适以及单一的效果。<滑套式消声器安装时附带接头垫片。
适配车型链接
Fits: HONDA CB250F 14- [JBK-MC43], HONDA CBR250R 14- [JBK-MC41]
This is a re-review of the replacement of the UniversalExhaust System.
I replaced the Baffle with the UniversalExhaust System, which allows you to detach the Baffle.
Without Baffle, you can get great torque near the revs, but the torque will be thinner in the low and middle rpm range.
This exhaust system of WR's has the torque feeling of Level with Baffle of UniversalExhaust System at low and middle rpm range and the power feeling without Baffle of UniversalExhaust System near the revs. Exhaust System1 pc and the whole area is Torque fully.
The only drawback is that the sound is too small.
This would be great if it was close to 94dB.
After all, a proper manufacturer's exhaust system has great characteristics.
This exhaust system is the best for those who prefer a sound that is not large.View Detail
Fits: HONDA CB250F 14- [JBK-MC43], HONDA CBR250R 14- [JBK-MC41]
I bought a used CBR250R and it came with it from the beginning, so I don't know the difference between it and the OEM, so I'm definitely not sure Write in values
The one on it is the one with the Titanium browning
About Sound
The sound pressure is not too loud, but the sound can be heard while driving The sound is like a single cylinder The sound quality is a dry sound Durrrrrrrrr! and pleasant sound quality
It feels great both when running in a relaxed manner and when the rpm's are raised on an aggressive basis I had thought there was no way a single cylinder could beat a multi-cylinder engine in terms of comfort, but I was overturned It's a nice sound Personally, I prefer a more subdued sound, but it's still a good sound
Performance
The valley of the Torque blows cleanly through to 10,500 rpm in the red zone without stress I got the impression that there is no Torque for the number of revolutions on the Flat... unless you're looking at Tachometer Sometimes it revs up, that's how good it is, the CBR250R itself has that kind of performance Maybe
Price
I didn't buy it because it was with me from the beginning, but if I did, I would have bought it for this price I have to say that Performance is high I don't think it's a bad buy
General Comment
Sound, performance, looks, nothing to say! Personally, I like the end of the end, like the BEAMS R-EVO, because I like the browning of the end as well If I get tired of this exhaust system, I might change itView Detail
Fits: HONDA CB250F 14- [JBK-MC43], HONDA CBR250R 14- [JBK-MC41]
Round TypeStainless Steel was selected for its low price.
Installation using liquid Gasket has no problem at all.
When IdolUp immediately after engine startup is a bit annoying, is it acceptable range.
It was able to experience Torque up of 3000 to 6000 rpm on the Manufacturer's blog as the power curve, because Axel degree of opening decreased, fuel efficiency has increased by 2 to 3 k.
There is an effect of reducing the Axel opening degree in both the pleasant sound and the noisy when the Axel is opened.
I like it better than NORMAL, so I like it.View Detail
I bought it for weight reduction of gsr 250. I will put a Cap on the other side because it will be one SideSingle Silencer, but it is quite hard and hard to fit all the way back.
Although it has only been fitted up to about half after all, it has no particular impact on driving. It seems there is nothing to take.
Sound quality changes considerably. I was surprised at the loud yardful volume.
Because the weight of the lower half of the car body has been reduced by about 7 kilos, it is easier to bank, and there is an impression that acceleration performance has improved.View Detail
I made this Slip-on Silencer by exchanging my first Exhaust System.
I was worrying about MORIWAKI 's Slip - on Silencer or WR'S, but I could not like the color of MORIWAKI, and since the developer got the enthusiasm and the information of Silencer from the developer on WR' s blog, I did it here.
At first I was planning to purchase Carbon, but as sunburn by sunlight seemed to be coming, I made it to baked Titanium.
Black cb 400sf I was more than I thought.
Installation was only with 12 mm Wrench and Pliers. 12 mm Wrench is Quantity : If 2pc you can not enter Pliers.
It was my first exchange, but I finished around 30 minutes.
It feels like it got easier to handle it because it got lighter. How to raise the speed is faster. I am doing Power up. I do not feel the slow Torque has decreased.
Sound sounds deep bass elegant and cool!View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。