- 改装零件
- 引擎(发动机)
- 进气系统(进气隔)
- 喷射(电喷)系统相关零件
- SP TAKEGAWA
- SP TAKEGAWA - 喷射(电喷)系统相关零件
- 商品列表
- FI CON2 喷油控制器套件
FI CON2 喷油控制器套件
商品 # 05-04-0016
海淘直邮价(不含运费&税费)
783.59 RMB (16,408 日元)
定价 819.88 RMB 节省 4%
+164 Webike点数 (7.83 RMB)
此商品已停售。 |
商品 # 05-04-0016
海淘直邮价(不含运费&税费)
783.59 RMB (16,408 日元)
定价 819.88 RMB 节省 4%
+164 Webike点数 (7.83 RMB)
此商品已停售。 |
※本产品仅适用于GROM(日规)。
※FI CON 2 供油电脑共有两种版本:GROM(日规)与MSX 125(海外规格),购买前请务必进行确认。
※此商品无法对应泰国规格的MSX 125。
※无解限转功能,且转速上限与原厂设定相同。
※请勿同时安装其他品牌的HID 或点火装置;避免因电压剧烈改变的商品故障或损坏。
适配车型链接
Fits: HONDA GROM -15 (JC61-1000001-)*Not tested for MSX125 *Domestic specification only MSX125
Since I upgraded Grom, I thought that I had to compensate for the fire and introduced FIcon 2.
Starting with just 143 cc Kit, it is normal for some corrections to be made even at OEM, and if it is 4 km in the break-in operation, it moves quite normally. However, I thought that the air conditioning at the time of high rotation would be too thin as it was, and set up FIcon 2 right away.
Takekawa's handling Instruction Manual is carefully written, but if you do not image what what the constructor does, it will be work while feeling in doubt just working as instructed.
In short, it is to do Wiring to interrupt the OEMComputer, and to put the signal from the Sub computer into the Injector. And it's work to stop the O2 Sensor.
So take out the OEMComputer and its Coupler in order to interrupt the OEMComputer. In case of Grom, there is an OEMComputer in the Side cover under SeatLeft, so remove the exterior around Tank and Left Side Cover. O2 Sensor is in TankRight Side, so the exterior around Tank is Quantity : Pair (for Left and Right) It will be removed together. It is the largest to interrupt the OEMComputer's CouplerWiring
Even if it finishes successfully, the work ends with the replacement of the Coupler.
Setting also turns Dial according to the instructions of Mukawa river so do not set the troublesome carburetor setting many times over like Carburetor Vehicles.
We do test drive after installation, but because there is also break-in driving, fast acceleration is not permitted. I do not know the real performance, but it's always the Injection car, I can not feel dramatic Power up like Carburetor Vehicles.
It is a fairly thin setting when you watch a Plug that raises the heat price to No. 7 after driving around 100 km.. There will also be an outside temperature of 35 degrees in summer, but Plug may be better for No. 8.
Also, since Battery's Minus terminal is removed during work, it is necessary to correct the time of the clock after work.
View Detail
Fits: HONDA GROM -15 (JC61-1000001-)*Not tested for MSX125 *Domestic specification only MSX125
I attached KITACO's FController, but I purchased O2 Canceller so I bought it.
Installation dedicated Harness to Quantity : After adding 2pc, it is easily attached only by interrupting the Coupler.
Setting is also 15 X 15 Pattern, it is OK just by initial setting and matching Dial.View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。