晶钻型透明灯壳头灯
商品 # F1-10001
商品 # F1-10001
这些都是dmr-japan的房地产产品,与ns400r和ncr 80相一致。
川崎火车是一个安全保障的好地方。 求25w货)
川崎列车、本田列车的定期检查项目。这是本田的另外一个案例。
适配车型链接
Fits: HONDA CRM250 Longer mounting holes may be required, not available for MD24 AR., HONDA CRM50 The mounting holes may need to be machined with long holes., HONDA CRM80 The mounting holes may need to be machined with long holes., HONDA
This is a re-evaluation as I have converted to LED.
The Valve I used is PIAA Headlight Bulb LED 6000K DualBeam 12V 5/6W H6M for Motorcycle. (PH7 equivalent) It is
The XLR80R is an all-AC car, so the Valve I chose is an alternator and supplies.
Simply replace with a Halogen bulb and the job is done.
Since the Multi-reflector Unit has more depth than the OEM Headlight Unit, we were able to install the PIAAValve, which is almost twice as long as the Halogen bulb, without any interference.
Also, because it is a multi-reflector, it does not cause the high-low inversion phenomenon that often occurs when using OEM headlight units with LEDs.
The Clear Lens Multi-reflector is LED, so it is very bright. The spread of light and the height of the light are not a problem, and the safety is increased by introducing LED Bulb.View Detail
Fits: HONDA CRM250 Longer mounting holes may be required, not available for MD24 AR., HONDA CRM50 The mounting holes may need to be machined with long holes., HONDA CRM80 The mounting holes may need to be machined with long holes., HONDA
The OEM Cut lens has thick and dark glass. This product has Multi-reflector and thin plastic lens, so it is much brighter than the Halogen bulb.
If you use LED or HID with Cut lens, the optical axis and high low will be Brown and bitter Brown, so it is necessary to use Multi-reflector.
The point to be concerned about in the installation to XLR80 was glad if it was attached with Seal or Rubber plug of the hole blocking at least because Position is unnecessary. it has a feeling depth than the OEMHeadlight unit, and it is difficult to organize Harness. Sponge tape is necessary to fill the gap with Cowl. The optical axis adjustment screw, spring, and screw receiver plastic need to be used with the OEM product. These are the things that I think.
Although there is a point to be concerned about, it becomes bright visibly only by exchange of the Headlight unit. There are various opinions that the making is cheap, the paint peels off, and the Position unit is loose, and I agree with that point, but when I think that it becomes bright easily, and it becomes a stepping stone to LED conversion, I thought that it was a product of high satisfaction.View Detail
Fits: HONDA CRM250 Longer mounting holes may be required, not available for MD24 AR., HONDA CRM50 The mounting holes may need to be machined with long holes., HONDA CRM80 The mounting holes may need to be machined with long holes., HONDA
I bought this to use as a LED Headlight.
The position lamp can be attached, but I don't use it, so I have blinded it.View Detail
When I ordered related products for xr motard, I found that only one product can be ordered. For its appearance, the transparent part is very crystal clear, but I am also annoyed by it. I hope it will be better if there are more color choices. .View Detail
Fits: HONDA CRM250 Longer mounting holes may be required, not available for MD24 AR., HONDA CRM50 The mounting holes may need to be machined with long holes., HONDA CRM80 The mounting holes may need to be machined with long holes., HONDA
I used to be stunned by the darkness of the flashlight of a long time ago, but this product is definitely brighter The latest LED Headlight Standard However, the latest LED HeadlightStandard EquipmentMotorcycle is not far behind
XR100MOTARD does not have the same connector as the XR100MOTARD, so soldering and processing of the terminals are required It is
Moreover, a Position lamp is attached, but there is no use for it I blocked it with tape
I would have liked to see the Multi-reflector used as an OEM since I drive a moped at nightView Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。