摆臂重量:正常3.5kg至1.8kg(*)
摆臂重量为1.8kg(*),而原厂摆臂为3.5kg,重量轻,刚性强。我会让你。
NSR50/80(D型)车轮的摆臂。
摆臂的宽度为184-187mm。
在摆臂的内侧焊接了一个U型制动挡板。
您可以通过使用Ape的后盘轮毂和G-Craft的后卡钳支架(零件号33136)将鼓车改装成碟车。
gCraft Part No.33136后卡钳支架和`nsr50/80轮毂可用于盘算。<12-3.75j合金轮毂可以安装。
*:车型:格罗姆/管型:三方形/无稳定器/+0cm
选装说明
【选装:摇臂涂装】黑色阳极氧化/丝光油
.黑色阳极处理(gCraft #60198) +25,000日元
这是将摆臂表面进行黑色阳极处理的选项。
。Cerakote(gCraft #60807)+30000日元
Cerakote是目前美军使用的一种特殊烤漆。
经检验,可应对恶劣条件,并着重开发了 "耐热"、"耐磨"、"耐用"、"散热"、"绝缘 "等性能。
陶瓷经专用机器粉碎后混入涂料中,提高漆膜强度。
这使表面呈现出类似珍珠皮的外观,但涂层可能非常薄(25微米),并可能留下焊接痕迹(珠子)而不被隐藏。
这种表面在所有涂层材料中附着力最高,即使弯曲也不会起皱,即使是垫脚石也不容易掉漆,适合 "框架 "摆臂。
【方案1】【方案1】链条滑块用螺栓固定(gCraft零件号:60228)+1000日元
将链条滑块由铆接改为螺栓固定。磨损后容易更换。
【方案2】将枢轴部分的滚珠轴承(gCraft零件号:60006)+3000日元
一般情况下,我们会将枢轴部分改为滚珠轴承。
【选购件3】立钩底座(m6)(gCraft部件号60903)+3000日元
可在底座上安装gCraft立钩或外置立钩(m6)。
Swingarm Weight: Stock 3.5kg to 1.8kg (*)
The swingarm is made of aluminum 7N01 material, which is 1.8kg (*) lighter than stock swingarm 3.5kg, and has high rigidity, which improves the operability of the motorcycle by reducing the unsprung weight.
This swingarm can fit NSR50/80 (Type D) wheels.
Swingarm width is 184-187mm.
A U-shaped brake stopper is welded to the inside of the swingarm.
G-Craft Part Number: The 33136 rear caliper support and the rear disc hub for Ape can be used to convert a drum model to a disc model.
G-Craft Part Number: Disc conversion is possible with 33136 rear caliper support and NSR50 / 80 wheels.
Fits 12-3.75J aluminum wheels.
*:Model: GROM / Pipe Type: Triple Square / No Stabilizer / +0cm
■Option Description
[Options: Swingarm finish] Black anodized / Cerakote
・Black anodized aluminum (G-Craft part number: 60198)
This is an option to make the surface of the swingarm beautiful black anodized finish.
・Cerakote (G-Craft part number: 60807)
Cerakote is a special baking and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.
This gives a pear-like surface, but the coating can be very thin (25 microns), and weld marks (beads) can be left without being obscured.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot section ball bearing change (G-Craft part number: 60006)
The pivot part that normally uses bushings is converted to ball bearings.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.