WM 脚踏后移套件
It's not mentioned in the manual. What is this? and I had to do a little work to install the brake switch.If you install the Switch according to the Instruction Manual, there are two problems.1 The am...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
WM Bolt onLucas type尾灯组
The official Site says it is a special product and Bolt On installation, but it is not.There is no space to fit the wiring, so I had to cut the bullet terminal and shorten the wiring to the limit and ...
WM 铝合金头灯整流罩
What can you say, but a great looker and keeps the draft off the chest.
Now to the bike fitting - it was like a glove, around the light bucket, top brackets and bottom bracket as supplied for the 20...
WM 超短版铝合金后土除
The quality is not as good as the price. It doesn't fit perfectly on a motorcycle, it has to be forced.I expected a lot, but I'm sorry that I'm disappointed. There are many types of rear fenders, so I...
WM 铝合金前土除 I
First of all, it's a vehicle-specific part, but it wasn't a pimped-out version. (There may be some individual differences.) The bracket part interferes with the tire and it doesn't work even if you be...
WM 中短版铝合金前土除
Installation of Fender and Bracket, Installation of Fork and fine tuning of Fork I used it... there are a few Stain-like scratches on the front of the Fender and I used Compound to lightly scratch the...
WM 把手角度止挡器
I used it with the DAYTONA Vintage top bridge Handlebar Lock failedWhat's wrong with your vehicle?I was able to lock the Handlebar without the Handlebar StopperThe thing itself is not badI'm going to ...
WM Bolt onLucas type尾灯组
Installation was completed, and Position was lighted up, but because Stop-lamp does not light upWhen I checked the Socket, I found that the construction of the Socket was too poorly made and contacted...
WM Fin Tappet 汽门检修盖
Purchase on the occasion of the Tappet adjustment, equipmentCompared to the OEMCover, it may be a little heavier because of the fins, but the engine head textureI've had it on for 6 months and no oil ...
 |  |  |
| | | |
WM Bolt on龙头锁套件
Returned as initial malfunction in which the key spun, substitute arrived.Quickly, mounting. It works well.The next day, moving it for 1 day, the key is idle.I thought it was a lie, I thought it was b...
WM Bolt on龙头锁套件
I am wearing it simultaneously with WM's Handlebar Stopper.As described in the explanation, I do not have with Collar, but if using Handlebar Stopper together, there is no problem.As for the appea...
WM Bolt on龙头锁套件
After installation, I parked and tried to put Handlebar Lock, but it did not take.The locking rod does not come out, the key only rotates GRUGRU.Japanese Vehicle Inspection Correspondence also made an...
WM Bolt on龙头锁套件
Since the Key cylinder was transferred under the Tank, it purchased.
Also making is solid and the engine performance is also satisfactory.
