TWM 快速型油箱盖
Z1000 (2011) Used in.<Mounting>Do not use the OEM removed Screw, install it with the included Screw.Quantity : 2 pc is Dummy, using Bolt to install on Cap base.However, the three Screw positions...
 |  | |
| | |
TWM 切削加工可溃式煞车拉杆 (标准型 短)
When installing the brembo radiopont, since the original Lever does not fit exactly, replace it with TWM's Lever who is used to it. The degree of bending of Lever, the depth of fingers, thickness ...
TWM 切削加工可溃式煞车拉杆 (标准型 长)
Although it had equipped with the Lever of the pure Option, since a Design and texture were pleasing, he bought this product.
The play width whose Lever which was being used before suited to itself ...
 | ||
| |
TWM 切削加工可溃式离合器拉杆 (标准型 长)
Replace the brake lever with TWM Lever and look at the Clutch Side I bought it to match since it's still NORMALWith the beautiful finish of Duralumin, the balance with Brake Side became good and I'm s...
TWM 切削加工可溃式离合器拉杆 (标准型 短)
A Short type is [ 1 cm of pure lay ] also only short.
It is a Recommendation if the Design and a color are good now.
I think it solid to make ....
TWM 切削加工可溃式离合器拉杆 (标准型 短)
[ -- the Webike Monitor ] -- also with the pure Lever, although there was no dissatisfaction in particular, he wanted to mainly change appearance, and it purchased and attached.
appearance became a ...
TWM 切削加工可溃式离合器拉杆 (标准型 长)
Since the Brake lever was changed into TWM, similarly the Clutch side is changed.
Since it is Wire type Clutch, the same regulating function as the Brake side does not occur.
The Dress-up up and ret...
