SP TAKEGAWA (Special Parts TAKEG(SP 武川)

The Clutch Spring uses 6 Reinforced types.The Clutch board was replaced with a new one.The work took about 2.5 hours.1.The clutch board was made new, so there seems to be no more slippage in the clutc...

The sense of presence of the motorcycle is improved by the solid brightness and sufficient white color. Although the price is a little higher, it can be used at ease because of the one-year warranty.

I bought it to install an additional meter on my Grom. I bought it at a different time, but it is not outstandingly good, but it works normally. Meatless. (with Hole) You can adjust the angle in the

The body is Small and installation does not have any problem in particular, but when direct sunlight hits the display part, it is hard to see. It may be the problem of cost, but I think that there is ...

I had the OEM Carrier on, but switched to this one due to a product defect.As a Carrier, I didn't get much use out of it, but I was worried about changing direction and backing up, so I put this on.

There are two types of Recoil packets, 1D and 1.5D, but basically, if you buy 1D, it's not a problem There is none. Because even in JIS. The Bolt's cost is only 1D, as long as the female threads are i...

When using 1 or 2 times Screw - - - Fixed with Tap and Dice after use (sweat) Screw run out after 3 rd use, it was not possible to use (Tears) After examining various things, Mr. Takekawa's Chain ...

It's the worst - - -.Chain cut During work, the head part of the attached Bolt got threaded. That makes it impossible to retrieve Chain and it has become a challenge to buy Chain again (Because I ...

I bought it for Mission's OH. Easy to use with Slide hammerType, Attachment of each Size is available, and you can extract Bearing of various Size. Although Hammer is a little heavy, it can be use...

Purchase for removal of Flywheel and Coil from Engine that rainwater entered.This is recommended to fix EngineI managed to let my friends support me. I managed to get rid of it somehow ... It was very...

I installed it on z 125.I found this item when I was worrying about putting a helmet lock at which position, it was a colleague!Result The satisfactory shopping was made ♪

Although the portions of a Key-cylinder part and a Hook also had good black if they may be allowed to wish so much, is it impossible, considering paint application peeling?
Using feeling intensity is...

Attachment is also easy and it has also satisfied the fixing position well exactly! The portion which hangs a Helmet thinks that the size which is generous to a slight degree could be sufficient as h...

During parking, since it was inconvenient, removing a sheet one by one was looking for the Holder suitable for CBR250R.
Since it had general-purpose article, wearing was considered, but this product ...

Although changed to GSXR-750 (L1) recently, the helmet holder is attached to the SS type vehicle only under the rear seat. Since he wanted to have carried out somehow or other and to attach a helmet h...

Installation on the seat was quick and easyHowever, when I pulled the Seat on the motorcycle to test the extension after it was installed, I found that it was not as long as it should be The side open...

Used with X4. Very useful.Seat is not Separate, but it can be used without problems. (Depending on Seat shape)Large I can not use it as a good package, but hats and Backetc. It is useful in the near s...

Although we are ninja 250, we struggled to install. I got miraculously successful when I gave up halfway but I'm not confident that I can turn on again as I do not know how it arrived.. But usabil...

We are always under Seat in preparation for cases where luggage has increased by any chance. Pillion Seat, covering the whole if you put your luggage, you do not have to worry about overloading Usabil...

I bought it for Touring in the neighborhood.There is also a large large item for Touring, but it usually hurts the appearance and usually a bit ...There is also a thing to be attached to the Tandem se...