Matris 防甩头套件
I was looking for a steering damper for the 2013 model Ninja 250. Not being complaining about Ninja 's Handling, Steering damper in Motorcycle was a dream from a long time ago ? ? ? I decided on M...
 |  | |
| | |
Matris 防甩头套件
For Cost it's a little expensive but at that priceIt is a matching performance quality.It is easy to install and recommendable products(* ゜ ー °) ゞ ⌒ ☆
Matris 前叉弹簧套件 KS
In conjunction with Matrix made rear shock replacement, MT09 genuine front spring was replaced with Matrix. Genuine spring rate 7. 35N / Matrix standard spring rate 8 from mm. 5N / Rate up to mm. In M...
Matris 前叉内管套件
It is MatrisForkCartridgeKit for MT-07.Originally I was using the HydroKit person, I felt the limits of Setting width, so I dared to change it.When purchasing HydroKit, this Cartridge did not exist.I ...
Matris 前叉内管套件
【What made you decide the purchase?】I started playing Motorcycle Gymkhana, I could not adjust Damper with OEM Suspension, Spring's strong opposition. Switching slalom and so forth, I got missed fr...
Matris 前叉内管套件
First of all, :Remove Top cap and NORMAL's Spring, Spaceretc. I will remove all of them..Oil seal was reused in my case so I carefully removed it.Installation is easy because it only puts Cartridg...
Matris 前叉弹簧套件 KE
Used in the 2004 model Z750.Hyper pro (ProgressiveRate) Change from.In the case of this Motorcycle, the OHLINS Rate is set to be harder than 9 Nm and the Birds 11 Nm and other Manufacturer. In my case...
Matris 防甩头套件
How to install etc before purchasing etc etc. As I asked a question, I installed it with aware of the Large change to some extent, but it was Large change of installation over the previous answer. Alt...
 | ||
| |
Matris 前叉上盖 工具
Installing Matris Front Fork Cartridge kit F12RX when installing back on bike, socket stripped at 38Nm. @ Matris Please make a better socket harder plastic or Soft Jaw materials.
