MORIWAKI One piece 全段排气管 黑色触媒转换器
I installed it on a 2000 model of zrx400?It sounds good with heavy bass. I'm satisfied!
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
MORIWAKI 后视镜锁孔饰盖
I've decided to remove the Mirror as I have more opportunities to run on Circuit.I've been looking for a Can Seraar because my aesthetic sense won't allow me to just remove it.I've seen other Manufact...
MORIWAKI 全排气管排气管 ZERO 【2021年6月发售】
You can enjoy the low volume and pleasant bass sound that does not become a nuisance even if it runs in a residential area. I installed it on my PCX for commuting, and it is a very nice product that c...
MORIWAKI SHORT MONSTER 全段排气管
Short Tube, Titanium, so light! The texture is perfect ^_^.The volume seems to be a little quieter than YOSHIMURA.The sound is a little dry and Race ish. (The bass works better on YOSHIMURA.)Performan...
MORIWAKI MORIWAKI 电盘外盖
This is a standard part for Kawasaki air cooled vehicles, but the width is thinner than the NORMAL part, so the damage will be worse when falling.I thought I could reduce it and installed it. (Gasket ...
MORIWAKI MX RACING Slip-on排气管尾段 SPEC1
I installed it on my jc92.I changed the exhaust system from NORMAL and the difference is noticeable, the peak power jumped up! With the OEM exhaust system there was a little bit of sluggishness at sta...
MORIWAKI MX RACING Slip-on排气管尾段 SPEC1
I bought this to make my NORMAL Grom closer to the HRC GROM Spec.It would save weight, but you would also have to buy an additional EXPipe for the HRC.I thought the work was super easy, but if you're ...
MORIWAKI 碳纤维前土除
I bought it because it fits CBR900RR (00) and VTR1000SP, but I couldn't install it on CBR900RR (00 929) because the back side hole position didn't fit at all. It is a pity.
MORIWAKI 夜光型滑行块 (防倒球)
The hole punching stencil included with the package was useless for the '21.The hole is drilled with a 22mm hole saw, and the hole is widened slightly with a Leutor Large→ If the hole is not widened, ...
 |  | |
| | |
MORIWAKI 钥匙圈(商标)
The quality of MORIWAKI Emblem is excellent and the key holder has a high quality feel to it.
MORIWAKI 钥匙圈(竞赛型)
I did not own any Moriwaki exhaust but the look and design of this key chain interest me. The quality is superb and because of its cover is made from leather, it did not scratch the motorbike key area...
MORIWAKI 钥匙圈(竞赛型)
I attached MORIWAKI's Exhaust System, so I made a choice.Because it is made of leather, it seems that it will not be scratched near the Top Bridge.I am looking forward to changing the color of the...
MORIWAKI 钥匙圈(竞赛型)
It is a Key ring.He wanted to attach to the key of a Motorcycle and it purchased.Since a raw material is also leather and a crack is not easily attached to the circumference of a key, it is recommende...
MORIWAKI 钥匙圈(竞赛型)
[a Webike Monitor] -- also making the Logo of the Katakana called bear a close resemblance to Saki's youth in about 30 years -- although -- it is and makes me who reach his 40's and will ride on a Mo...
MORIWAKI 钥匙圈(商标)
Although it thought which it would be made [ direction of a trademark ] the direction of a RACING, since it was not so high, he bought both.The direction of a trademark regards only a few as a high gr...
MORIWAKI 钥匙圈(竞赛型)
It attached to the key fitted with a motor.
although the somewhat large kana ? was thought when it saw at the beginning -- -- I thought that this was an ant now since it is very well conspicuous whe...
MORIWAKI 钥匙圈(竞赛型)
Although it is budget prices, there may be a high grade feeling. The size was also good exactly!
MORIWAKI 钥匙圈(商标)
The logo of middle separated. When attached with the adhesive bond, it stopped separating, but I consider that it is better to have been more powerful at the time of shipment and to stick.
