KIJIMA 脚踏后移支架
What I felt while driving on the R125 bike was that the lower body was in the foresight position and the upper body was in the racing position, so I felt that the upper and lower body were unbalanced....
What I felt while driving on the R125 bike was that the lower body was in the foresight position and the upper body was in the racing position, so I felt that the upper and lower body were unbalanced....
When I bought my Motorcycle used, I had it installed as an addition.I've always been a cold-weather guy, and having used Honda's Sports GripHeater on a previous Motorcycle, I've long been aware of the...
I can't see the back and the Mirror shifts with vibration, but I'm happy with the shape.
Not only for Dress-up, but also for accidental Fluid leakage.It is possible to absorb it with this product before it adheres to Cowl.
很早就关注rebel500的改装,总觉得原厂后尾灯缺少复古味道,kljlma的后尾灯完美融合车辆定位,后尾灯的亮度非常高,识别度也很好,尤其在夜晚的时候非常漂亮。led的灯具给人一种高级的感觉,而且安装也很方便,与原车匹配度很高,链接线插就可以,无需任何改动,复古进行到底。webike的物流也很给力,不错的购物体验。
-------------------------------------...
I installed it on a CYGNUSX SR Model 5.If you remove the top cover from the front, you can see the Service Coupler, and if you remove the end cap, you can install it with Bolt On.It is for Cigar socke...
I installed it in my ZX-10R with Fender Eliminator. I am satisfied with the design, texture and light emission.But when I ran in Circuit, the root was damaged. Fortunately, it did not fall off, but it...
This winter, the temperature has been below 0 degrees Celsius, and I couldn't stand the coldness of Lever even though I commute only 6 km, so I decided to buy it.The GripType was also attractive, but ...
I bought this to prevent scratches on the body when loading luggage. I don't want to scratch it unnecessarily, but I also don't want to throw away the feeling that it is used moderately, and honestly,...
我骑叛逆者500,这次够买的是马鞍包支架,支架质量不错,装在车上不好看,还没有包包配套,不太好选择配套包包!
----------------------------------------------
I ride Renegade 500, this is enough to buy a saddle bag stand, stand a good quality, install...
我的车子是Harley-Davidson的FATBOY,2019年款的。原厂车子的刹车离合拉杆是银色的,感觉不太好看。还有就是特别的粗大,捏起来有些费力。在webike上买了这款黑色KIJIMA的细长拉杆后,外表美观了,同时捏起来也感觉不像之前那样的吃力,很满意的一次购物。
----------------------------------------------
My car is...
[How is it used?Replaced with this product in conjunction with the front and rear Clear Lens conversionWas the one you received as per Image?Street ImageWas the installation difficult?EasyHow was your...
The brake lever of the SR was broken, and I thought I would fix it when I inspected the car, so I bought it to renew the Left Side anyway.The Specifications are the same as OEM and the grip is fine.Th...
设计的非常好的w800边包架,电镀色和原厂车身其他电镀色的质感非常的一致。安装上就像是原厂装备一样。即使不挂边包也会很好看。和原厂样子非常的协调。用起来也蛮方便的。边包架的底边的两个角上专门设计了绑带绑的位置。如图是安装上边包的样子。安装的时候最好和后货架一起就安装了。
----------------------------------------------
Very good d...
Because I purchased KIJIMA's K3Side Back, I also purchased the support from KIJIMA. The paint job was solid and I was able to install it without any problems. The instruction manual for installation w...
The inconspicuous appearance and brightness were as expected, but Red and Black of the branch Harness of the Wiring diagram were reversed, and the terminal of Red became a Female terminal.After a lot ...
The inconspicuous appearance and brightness were as expected, but Red and Black of the branch Harness of the Wiring diagram were reversed, and the terminal of Red became a Female terminal.After a lot ...
You can adjust the distance between the bolt holes with the slide type. It is convenient to fit almost any car models within the corresponding value.The bag can be removed by simply loosening the bolt...
webike上面有很多头盔锁,选了很久,最终选择这一款。我的车子是本田CBR650R,看了很多安装案例,这一款是最适合的,这一款是装在后座脚踩的地方,自带锁很好很安全。选择这款最主要的原因是装完以后相对比较隐藏,不影响整车效果。
----------------------------------------------
There are a lot of helmet lock w...
The OEM had to remove the Tandem seat, which was a hassle, so I thought it would be cheap and easy.
The helmet holder of NORMAL is hard to use, so I replaced it with KIJIMA's bracket. If you are planning to buy a NINJA250/400, you should buy this one too.
I bought it because the original Helmet holder had a method of hooking the wire to the hook under the seat and I was worried about security.It is very easy to install because it only removes Tandem Fo...
For reasons of convenience, I've been experiencing some push-pull on my commute.I bought it because I didn't want to hold the Helmet in my hand at that time.You're right to buy it.Installation was a p...
Installation is easyIt was easy to install, even for me who has less than half a year of motorcycle experience and has no skills or knowledge.It does not stand out and does not interfere with the desi...
Before installing the Helmet, it was inconvenient to hold the Helmet in one hand every time I left the motorcycle, etc., so it is a very useful item for DUKE without Helmet Lock!However, there are som...
Can be popped on. Can be attached quickly.I put it on my wife's cbr250r.I let my partner do the installation work, and even a woman who is not used to machines or DIY could do the installation work wi...
Can be popped on. Can be attached quickly.The keys are also Compact and not jerky.Best of all, you can rest assured that your Helmet is safe from theft no matter where you go.
I bought it because I changed my motorcycle. for HARLEY is the sensor escape? (The notch in the picture) was important, but I couldn't see any reason why it would be particularly necessary for my Moto...
我的车子是KAWASAKI的NINJA 400,2019年款的。买这个是为了换刹车油,换完刹车油后难免会进去空气,之前都是手动排气,用了这个之后感觉非常方便,用注射器一抽空气就都出来了。比手动快了很多。为了增强耐用性,就换了个玻璃的瓶子。
----------------------------------------------
My car is 400, the 2019 mod...
If you are playing with motorcycle by yourself, you may have it, but you may want to buy a large size Pin when you need it. In my case, it seems that the size I use is the same in the end, so I still ...
This is a safe and easy way to return the Caliper piston to its original position when replacing brake pads, without damaging the Caliper Seal because it applies even force to the piston instead of fo...
The Grip is easy to grip and is designed for ease of use, which makes the installation and removal of the exhaust spring much easier and less likely to cause damage to the exhaust pipe.
Purchased the DL1000 V-STROM250's Front Blinker in an attempt to position it. As a result, a good place for the installation of Relay became the inside of the part of Shroud style, the waterproofing t...
I bought a DAYTONA for my Harley in-car tool.When replacing the rear suspension, I bought this product because there was no 50Size available and I wanted to get other sizes as well.The accuracy is not...
It can be used to adjust the level of oil in the reservoir for brake fluid and clutch fluid and to remove the fluid from the reservoir.
Basically, it's a split pin that cannot be reused by the Manufacturer, so you can stock and quantity:1 Set of 10pcs. is useful for Large, and the quality is exactly the same as OEM.
The most commonly used Size is Quantity:It is a small part, but it is often used in very important places. [Contents] I'm happy if it is.
i used it for yzf-r25I was expecting it to be an Exclusive Design, butIncluded Parts:The bolt is too short to reach the screw when using the collarI used a different Bolt for crying out loud, but it's...
It is still useful to have a smartphone or USB power supply installed in Motorcycle.When exchanging, because there is a case that the Spanner touches the tank excessively, I think that it is good to p...
It seems that aging will occur. Rust or fading?The dimensions of the installation may be slightly Gap.The role of Cross Bar is best for attaching USBSocket and NavigationBase.
Also in the fixed part of the Handlebar, Screw Lock is used in NINJA, and it was hard to remove the fixed Screw. I can use it without problems at all in terms of products. Long term Spec. By aged dete...
As Smartphone and USB Charger can be attached, Smartphone Navigation was active in Large when I went to Touring. Long touring was also a very pleasant trip without Stress. Will there be more fun to ch...
I wanted to attach the USB terminal and Smartphone Holder to the front so I bought it.Large Incorporation made well and rigidity is neat.However, if you do not first image what you install, it may be ...
Rust has occurred from the installed position.Probably, it seems to be from Bracket sideI think that it is a part that interferes with Handlebar Clamp, so I think that it is a part related to life, so...
YXF-R25 - Since it is R3Exclusive Design, we replace Bolt, which has fixed OEMHandlebar, with Quantity : Pair (for Left and Right) If you remove one by one, you can easily install. I think that it wil...
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。