(0)
39 评论 浏览类型:
- 符合:
- HONDA gyro canopy (TA02-150-)
- HONDA gyro X (TD01-210)
- HONDA
Since the vehicle is old, we changed the oil pump seal and other parts while performing OH on each part of the vehicle.It is not available from Manufacturer only in this part here, but you can buy it ...阅读更多 - 符合:
- KAWASAKI
- YAMAHA
- SUZUKI
The plug cap on the RZ250 was getting sweet, so I decided to replace it.At first I thought to buy OEM, but there was only 1pc. of OEM in stock, so I decided to buy Quantity:2pc. It was going to take s...阅读更多 - 符合:
- HONDA
- SUZUKI
- YAMAHA
It is fully compatible with NORMAL. In parallel, we use SplitFire's TwinCorePlug cord.Even when Idling, which had a tendency to lose fire, it seems to be ignited reliably and is stable.When the Axel i...阅读更多 - 符合:
- YAMAHA
- YAMAHA YSR50 80
- YAMAHA TDR50 80
- HONDA
- KAWASAKI
Sorry for the consecutive throws.We replaced the secondary high voltage cord with Silicon cord from Uotani, which had been a pending issue, and did a test run.The Carburetor setting was claimed to cha...阅读更多 - 符合:
- YAMAHA
- YAMAHA YSR50 80
- YAMAHA TDR50 80
- HONDA
- KAWASAKI
I put it in to strengthen the ignition system of a '77 KH400.The mounting pitch is narrower than that of the OEM coil, so the bracket for the OEM coil was modified from a commercially available Gold p...阅读更多 - 符合:
- YAMAHA
- YAMAHA YSR50 80
- YAMAHA TDR50 80
- HONDA
- KAWASAKI
Outside chamber/silencer, air cleaner box, mixed spec.The installation to the car body itself is easy, but it is necessary to make a conversion cable to Bullet Terminal→Flat Terminal or to process 6V ...阅读更多 - 符合:
- YAMAHA MAJESTY250C
- YAMAHA VIRAGO400
- YAMAHA VIRAGO250
- YAMAHA DRAGSTAR400
- YAMAHA DRAGSTAR250
- ...和更多.
I think that there are many people who think that it is a brush-boom effect depending on the person, but because ignition tune can feel the effect at the time of the single engine, I exchanged it from...阅读更多 - 符合:
- YAMAHA MAJESTY250C
- YAMAHA VIRAGO400
- YAMAHA VIRAGO250
- YAMAHA DRAGSTAR400
- YAMAHA DRAGSTAR250
- ...和更多.
一直找寻gsx250r的改装高压包 发现只有适配gsr250的 所以只有购买这款去尝试了 希望适配问题不大 原厂高压包太低端了！追求日产品质
----------------------------------------------------------
I have been looking for GSX250R's modified high-pressure bag dis...阅读更多 - 符合:
- HONDA gyro canopy (TA02-150-)
- HONDA gyro X (TD01-210)
- HONDA
I used to use 2ST DIO AF27It's working fine.阅读更多 - 符合:
- KAWASAKI
- SUZUKI
- KAWASAKI Z1000 (air-cooled) KZ1000A2
- HONDA
- HONDA VF400 f
- ...和更多.
The outside dimensions are 99% the same as those of a famous US brand.With or without Logo, and only the color is different.I measured with a tester, and both primary and secondary resistance are fine...阅读更多 - 符合:
- HONDA
Bought this for my Honda PALADIN Oil Pump Shaft.ManufacturerOEM had been discontinued, so I was looking for the same Size.I'm glad you found the Exactly Size.阅读更多 - 符合:
- KAWASAKI
- SUZUKI
- KAWASAKI Z1000 (air-cooled) KZ1000A2
- HONDA
- HONDA VF400 f
- ...和更多.
Replacement from DYNACoil.It works fine, but the High-Tension Cord (Plug Cord) Press-in work is required forIt might be hard if you can't do Crimp or press fit, but some people break Bracket or Body, ...阅读更多 - 符合:
- YAMAHA SR400 78-92
- YAMAHA SR500 78-92
I was using Posh's before, but I wanted to use a more authentic one.It's expensive, but I'm excited.It works.good pointJust replace the OEM CDI.You can use the current Carburetor setting.Acceleration ...阅读更多 - 符合:
- YAMAHA MAJESTY250C
- YAMAHA VIRAGO400
- YAMAHA VIRAGO250
- YAMAHA DRAGSTAR400
- YAMAHA DRAGSTAR250
- ...和更多.
It is used for SG03JMAJESTY that runs more than 100,000km.In order to install it, you have to remove a large part of the exterior, which requires a certain amount of time and effort.It's almost twice ...阅读更多 - 符合:
- HONDA
- SUZUKI
- YAMAHA
There is a description of Manufacturer's fitment and WEBIKE's fitment guarantee, but it cannot be installed including the surrounding area which is very Large than OEM. I made a return request after p...阅读更多 - 符合:
- HONDA gyro canopy (TA02-150-)
- HONDA gyro X (TD01-210)
- HONDA
It is being used as an Oil pumpSeal for Honda GyroUp!This is helpful because there are no settings in OEM PartsNow I'm wondering how durable it will be.阅读更多 - 符合:
- YAMAHA
Even though I adjusted the Carburetor many times, there was a difference between good and bad times, so I thought no way and replaced the Controller. It is perfect now. Thank you for your help.阅读更多 - 符合:
- YAMAHA
- YAMAHA YSR50 80
- YAMAHA TDR50 80
- HONDA
- KAWASAKI
I installed it on my TZr250R 3XV1. It was possible to install it as it was without processing if the Pitch conversion Bracket which is attached was removed.The quality is that the Cover of the Plug co...阅读更多 - 符合:
- HONDA gyro canopy (TA02-150-)
- HONDA gyro X (TD01-210)
- HONDA
When I received the first one that was sent to me that was different from the size listed, I noticed it when I tried to assemble it with Rose.When I contacted We-Big, they responded immediately and th...阅读更多
