- 符合:
- YAMAHA BirdCity155 (SG37J)All BB8 models
- YAMAHA NMAX155 (SG50J)All BV4 models
- YAMAHA NMAX155 (SG66J)BBD6
- YAMAHA NMAX155 (SG66J)BBD2
- YAMAHA MAJESTYS (SG52J)2LD All models
- ...和更多.
Used on Initial ModelBirdCity125.Belt replacement and roller replacement were done at the same time.I only bought it at the same time because it appeared in the product list of the drive system, but a...阅读更多 - Grip replacement is put on when it's a hassle.I go out in the winter to change it when I change Motorcycle.It is slightly warmer if it is on the Level, which is better than nothing.It is not possible ...阅读更多
- Used for ADDRESSV125 with Large diameter Rotor and brembo4PodThe brake system is too strong, so the front tires have to be proper.We selected this MODEL which is also used in Circuit.It grips so well ...阅读更多
- 符合:
- YAMAHA BirdCity155 (SG37J)All BB8 models
- YAMAHA NMAX155 (SG50J)All BV4 models
- YAMAHA NMAX155 (SG66J)BBD6
- YAMAHA NMAX155 (SG66J)BBD2
- YAMAHA MAJESTYS (SG52J)2LD All models
- ...和更多.
Since it is an inexpensive part, we did not use it all the time and replaced it with a new one.It was installed without any problems at all.阅读更多 - 符合:
- YAMAHA BirdCity155 (SG37J)All BB8 models
- YAMAHA NMAX155 (SG50J)All BV4 models
- YAMAHA NMAX155 (SG66J)BBD6
- YAMAHA NMAX155 (SG66J)BBD2
- YAMAHA MAJESTYS (SG52J)2LD All models
- ...和更多.
It seems that most of the Motorcycle shops near me do not stock Scooter parts. Webike has a large selection of parts and you can choose the part that best fits your motorcycle. This time I chose K/PIT...阅读更多 - I put them on my AddressV125.This is a replacement for the Timson Tire, so that is the comparison.Grip is much better in both dry and wet conditions, and on dry roads I was able to beat the STAND and ...阅读更多
- I used it for the Front of ADDRESSV125 K6.It has a very high life span and lasted 26,000km until SlipLine.Also, it does not slip in the rain.I think it's a pretty good Tire.It's a bit expensive, but c...阅读更多
- I replaced the front wheel Tire. The price is cosy and stable ride.Heart. There was a feeling of slipping because of the new replacement, but it was soon resolved. You can feel the stable ride. I woul...阅读更多
- 符合:
- YAMAHA NMAX155
- YAMAHA NMAX 16 2DS
- YAMAHA CYGNUS X SR 16 BF9
I used this on a 2017 Ninja 1000; I took power for Relay operation from the Coupler on the License Plate Light.Just by interrupting the Coupler, you can get the power supply without modifying the line...阅读更多 - [How is it used?I use it for Address, which I use for commuting.Front and rear D307.How was your experience with it?Specifications are sufficient for commuting.It's been about 2 months since I replace...阅读更多
- I bought a new set of front and rear tires, and I bought the same brand for the front.Due to the difference in price, Front is a little narrower Size (3.00-10).Rear decided to protect the OEMSize and ...阅读更多
- I bought a scooter with new front and rear. New is good, but why this? I had to change to HOOP before break-in was complete and the price was not much different from Japan. I don't understand why you ...阅读更多
- I've recently purchased a new TIMSON scooter, but I was concerned about the lack of ground contact and the lightness of the handlebar.阅读更多
- I bought this because I wanted an easy to remove Grip heater.I was disappointed to find that the crimp on the Bullet Terminal was loose. I thought about returning it, but I could fix it myself so I di...阅读更多
- They are sold everywhere and easy to get.I've been wearing them on my commute to work Address.The grip performance and life are good and balanced.In my usage, it's cheaper than the D301 at the time of...阅读更多
- 符合:
- YAMAHA NMAX155
- YAMAHA NMAX 16 2DS
- YAMAHA CYGNUS X SR 16 BF9
I installed it on a CYGNUSX SR Model 5.If you remove the top cover from the front, you can see the Service Coupler, and if you remove the end cap, you can install it with Bolt On.It is for Cigar socke...阅读更多 - 符合:
- YAMAHA CYGNUS Gryphus 22 *It is convenient to connect to the optional coupler using Kijima product 304-7148
- in which case the plus and minus are reversed.
- YAMAHA CYGNUS X 16-19 *It is convenient to connect to a position light using Kijima product 304-71485
- YAMAHA CYGNUS X 07-12 (28S) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- YAMAHA CYGNUS X-SR 13-15 (1YP) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- ...和更多.
This winter, the temperature has been below 0 degrees Celsius, and I couldn't stand the coldness of Lever even though I commute only 6 km, so I decided to buy it.The GripType was also attractive, but ...阅读更多 - 符合:
- YAMAHA CYGNUS Gryphus 22 *It is convenient to connect to the optional coupler using Kijima product 304-7148
- in which case the plus and minus are reversed.
- YAMAHA CYGNUS X 16-19 *It is convenient to connect to a position light using Kijima product 304-71485
- YAMAHA CYGNUS X 07-12 (28S) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- YAMAHA CYGNUS X-SR 13-15 (1YP) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- ...和更多.
Installed on 125Scooter for commuting.The temperature is quite warm. It becomes about a hot drink of a vending machine.I think it is necessary to use it together with the Handlebar Cover, but I am sur...阅读更多 - When I purchased a special KnifeAxis Treat for commuting, the shop kindly replaced the front tire with a new one, but to my surprise, it was AsianTire's one. I don't want to use Asian Tire because I t...阅读更多
- The profile is a little more gentle than the d307, but I think this is better for the rear tire. The dry grip is comparable to the d307 and the ground contact is better. It's a soft feeling overall. I...阅读更多