YOSHIMURA 水箱护罩
To be honest, I don't know how effective it is, but it gives me peace of mind. The best thing is that it looks great.
 |  |  |
 |  |  |
 |  |  |
GSX - R150是东盟地区的典范。作为对该地区运动运动流行的回应，它回应了人们对高兴趣运动模式的日益增长的需求。 我已经从日本出口了“猎鹰渔业”这样的成品车，但我推出了一款小排量的运动自行车作为更广泛的观众的升级模型。这是为了加强铃木在东盟地区的品牌形象。 我们计划在东盟地区开始销售，不仅在2010年初，而且在印度尼西亚。 水冷单缸DOHC 4阀门147.3 cc发动机安装在一个轻便紧凑的阀体上。“Suzuki Easy Start系统”是通过推动无钥匙点火系统(只有先进的型号)和一个推力而不保持启动开关按下启动。 尽管这是一个令人担忧的规格，最大的输出是14.1 kW (19.17 PS) / 11000 rpm，最大扭矩13.9 Nm / 8500 rpm，这是相当高和高的输出类型，根据最新的信息在海外报道的节目。配备6速任务，LED前照灯，全数字液晶仪表等燃油喷射功能齐全。 它重量轻，重量126公斤，而且似乎你可以期待迅速的运行，充分利用1300毫米的短轮底座。 R150作为欧洲和北美的“GSX-R125”模型的引擎扩展版本，在早期的intermot中宣布，并在早些时候提出一个话题，强烈的加强了目前在亚洲流行的150cc类比赛，毫无疑问，他是有意识的。 这意味着成熟的跑步性能和足够的设备来满足亚洲运动爱好者们的眼光。
| 移位 | 147 | 发动机(引擎)类型 | Water-cooled/4-stroke/DOHC/4 Valve/Single Cylinder |
| 最大输出马力（ps） | 19.17@11,000rpm | 最大扭力(转矩)（kgf / m） | - |
| 车重（干重） | 126 | 油箱容量 升 | 11 |
YOSHIMURA High Line 后驻车球
It's a must-have item for bike maintenance.
I think it's better to fill the hall before rusting.
I'm planning to do YOSHIMURA exhaust tuning, so I think I've configured the set.
You can tighten the mounting using a hex wrench, and it consists of 2 pieces on the front and back....
I think it's better to fill the hall before rusting.
I'm planning to do YOSHIMURA exhaust tuning, so I think I've configured the set.
You can tighten the mounting using a hex wrench, and it consists of 2 pieces on the front and back....
Dimotiv Radiator Guard STD
I had to remove the Cowl on the Left Side to install it.Even with the Cowl removed, the Parts around the Radiator were in the way and it was a real pain to install.In the end, I bent the top of this product by hand and installed it forcibly, but after installation, it still interferes with the parts...
YOSHIMURA High Line 后驻车球
I wore it on my KATANA, which I bought jointly with my brother. I used the same one on the Busa I got from my brother a while ago, so I had no other choice because I knew it was high-class, good-looking, and easy to use.
BABYFACE 行李挂勾
When installing the single seat cowlLet's remove the Tandem Footpeg too! I came up with the idea and bought & installed.I also made the Bolt (m8 20mm) inconspicuous Black, so Refreshing!You can also use it as a Holder if you pass the Helmet Belt through it when stopping the car.
BABYFACE 正时盖孔塞
StarterClutch cover mounting type (Right Side)Installation is easy because all you have to do is remove the OEM plug and replace it.Wiring is carried out in the wiring hall, and Parenthesis is good in the race ish.The build is good, and the Gold Anodized is one point and GOOD.Baby Face's Logo mark i...
R9 Exhaust GPX-SS 全段排气管
The balance between the price and the product is taken for better or worse.I would caution you that it took a long time to deliver and the packaging was not very encouraging.Installation is easy with PlugAndPlay.If you have removed the Tandem Footpeg, you need to make or buy the Exhaust Bracket your...
YSS 前叉升级套件
Basically, I agree with kamayan27, and I'll limit myself to talking about it in Race use.Brake initial behavior is good, which cannot be handled by changing oil viscosity or oil level.The lack of spring rate will be eliminated, the Construction Manual says, and Not by volume, but by volume of PD Val...
YOSHIMURA High Line 后驻车球
I bought a new one because the Stand Hook I had didn't fitI thought that I would buy even the expensive YOSHIMURA's one, because it is a good idea, but after all, it is the same as the parts' I think it was an expensive purchase for the roleIt is only a Stand Hook to hang a rear stand, so even if it...
M.A.D. GSX-R150 双臂型挡泥板
I installed it on my GSX-R125 and the Instruction Manual doesn't make sense to me The language and hard to see pictures were the only things that were totally unhelpful To install it, it needs to be sandwiched between the Swing Arm and the Axle Nut, and the OEM Axle If you try to install the Axle Nu...
(4.0)
