TANAX 整流罩后照镜9
good quality , but only 1 pcs mirror , need remark purchase 2 unit. fast delivery and nice look. giving good quality item , can purchase with this company trusted 100%
 |  |  |
 |  |  |
 |  |  |
 | ||
-
| 移位 | 999 | 发动机(引擎)类型 | In-line 4-cylinder |
| 最大输出马力（ps） | 202ps/13,200rpm | 最大扭力(转矩)（kgf / m） | 12kgfm/10,800rpm |
| 车重（干重） | - | 油箱容量 升 | - |
ACTIVE 无土除套件
The long tail is a curious exchange.The installation itself was painless, but it would have been better if there was a Seal to hide the OEM holes.I'm particularly concerned about the square hole in the Center, so I'm going to buy a Rubber plate and sandwich it in.
ODAX RENNTEC 后货架
The product accuracy was fine and installation was easy. For now, I put GIVI 43L on it temporarily, but I plan to reinforce it by welding because of the strength problem. I would like to have a strength of about 10kg from the beginning because it is a product of a certain price. 2.5kg is the end aft...
KIJIMA 加热握把 GH10
I installed it on CRF250L MD38.I couldn't find ThrottleAdapter in the car model information. "Type C. I was able to install it with no problem.The outer diameter of the Grip is the same as the OEM, so it doesn't look out of place at all.It's sure to make your winter rides more fun.
ALCAN hands 黑色橡胶握把套 Gamma
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...
LighTech 碳纤维零件 SUZUKI用／后挡泥板
When I go through a puddle of water, even a little bit, the Rear Suspension gets dirty, so I was looking for a good fender and came across this one.Installation was easy and SMART without having to remove the wheels as long as you have a long driver.I think it is functionally effective as a suspensi...
brembo 浮动式碟盘 左右套组
It is noisy because of the Floating Disc.It's not suitable for public roads, but it's lighter to handle than the OEMdisc.
BABYFACE 换档轴支架
After installing the Babyface Rear Sets on the GSX-R1000R, I decided to install this as an optional part. It is a little cheaper, but I decided to use this one in order to have a sense of unity with the Rear Sets. The installation is easy to do, the shaft is held firmly, and the fee ring of Quick Sh...
(0.0)
