- 符合:
- YAMAHA XT250X 06-17 [Lever type]K
- YAMAHA YZ80/85 95-14 [Lever type]K
- YAMAHA XTZ125 03-12 [Lever type]K
- YAMAHA XT250 08-20 [Lever Type]K
- YAMAHA WR250X 07-17 [Lever type]K
- ...和更多.
The machining and finish on this lever is excellent. I could not find any imperfections on it.
It was rather difficult to determine comparability before I purchased it but I can confirm that the K t...阅读更多 - 符合:
- SUZUKI DRZ400 SM 00-09 [Lever type]K
- SUZUKI DRZ400 S 00-09 [Lever type]K
- SUZUKI DR250R 97-00 [lever type]K
- SUZUKI DJEBEL250XC 98-06 [lever type]K
Clutch lever installed. Now that itit's look are great and pair up with previously installed brake lever(3 fingers). As always the products feels good.阅读更多 - 符合:
- YAMAHA WR250F 01-21
- YAMAHA TENERE700 20
- YAMAHA TENERE700 20-21
- SUZUKI RMZ450 05-21
- YAMAHA YZ85 19-21
- ...和更多.
Zeta makes some of the best quality parts I have used in my 20+ years of riding motorcycles. These Titanium Axle Bolts fit perfectly and are more easy to install than the stockers. I did use some asse...阅读更多 - 符合:
- SUZUKI DR-Z400SM 05-09
Bolts look great and feel like theyre quality made. The threads seem to be very close to oem I havent had a problem replacing any bolt around the plastics and seat. Love the size and comes in hand in ...阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
The OEM hand guard rotated at the base every time the motorcycle was tipped over, and the hand guard had to be repositioned after the motorcycle was raised.The price is quite expensive, but when you b...阅读更多 - 符合:
- SUZUKI DR-Z400SM 00-19
- SUZUKI DR-Z400S 00-19
- SUZUKI DR-Z400R 00-19
Wanted to replace the stock handle grip, but it is glue to the stock throttle tube. So i found this zeta alu throttle tube & i can change to aftermarket grip. It is smooths, great!阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
The clamp that came with the hand guard was said to rotate and damage the brake hose when it tipped over, so we changed to this. However, I wonder if there is a possibility of bending the Handlebar or...阅读更多 - 符合:
- SUZUKI DRZ400SM 00-09
- SUZUKI DRZ400S 00-09
It works quite well when parking on rough terrain.A SCREW LOCK is required for installation. A separate STAND is also required to make the project easier.After installation, the tilt of the bike when ...阅读更多 - 符合:
- YAMAHA XTZ125 13-15
- SUZUKI DRZ400SM 00-09
- SUZUKI DRZ400S 00-09
- SUZUKI DRZ125L 03-19
- SUZUKI DRZ125 03-19
- ...和更多.
Installation is very easy, just remove and replace the OEM.阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
good pointThe texture is good.A bad pointThe four supplied bolts are too short.It's a little expensive.Webig contacted the distributor, and the distributor sent us a Bolt of the correct size.Now, it m...阅读更多 - 符合:
- SUZUKI
- SUZUKI RM-Z450 05-13
- SUZUKI DR-Z400SM 05-09
- SUZUKI RM-Z250 04-13
- SUZUKI RM125 01-08
- ...和更多.
I replaced the OEM because it was getting tired.ZETA has a great color palette and is perfect for adding color.It is more noticeable than OEM.The price is a little high, but if you are looking for a d...阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
As others have written, the Bolt is not long enough for the SEROW250…The M8×60 Flange bolt is also a pain in the ass to get, so I hope they do something about it.Do other models come with it properly?阅读更多 - 符合:
- YAMAHA WR250F 01-21
- YAMAHA TENERE700 20
- YAMAHA TENERE700 20-21
- SUZUKI RMZ450 05-21
- YAMAHA YZ85 19-21
- ...和更多.
Titaniumium Chain Adjustable Bolt/Nut setItem number:ZT38-5501Installed on a GSX-R1000R 2019On Webike's product page, only the Off-road model is listed as a compatible model, but the ZETABrand website...阅读更多 - 符合:
- SUZUKI DR-Z400SM 06- Large diameter bar (28.6mm)
- can be used for genuine wires.
- Others Universal
- SUZUKI DR-Z400S Genuine wires can be used.
- KAWASAKI KLX250 -07 Genuine wires can be used.
- ...和更多.
It was very difficult for me. The OEM Product was not Open end, so I wanted to have Open end.As you can imagine, I wanted to install a hand guard. I also had a hard time drilling the hole for the hand...阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
The Size of the Bolt was different, but there was a response later.They sent me a Bolt of the regular Size.阅读更多 - 符合:
- SUZUKI DR-Z400SM 05-14
- YAMAHA WR400F 04-15
- YAMAHA WR250R 07-15
- YAMAHA WR250X 07-15
- YAMAHA YZ450F 03-07
- ...和更多.
The OEMBolt was Level to the extent that it became quite Small dirty, and corrosion was also quite worrisome, such as being difficult to tighten by hand. Even if it was cleaned, it was still Small dir...阅读更多 - 符合:
- SUZUKI DRZ400SM 00-09
- SUZUKI DR200S 15-19
- SUZUKI RMX250S 96-98
- SUZUKI DRZ400S 00-09
- SUZUKI DJEBEL250XC 96-06
- ...和更多.
With the Off-roadShop of the neighborhood, First Model Typedr-z400sm of the BALI thing was purchased at a very low price with the trade-in as it is.Glad to see that this Lever was fitted.I am using it...阅读更多 - 符合:
- SUZUKI RMX250S 92-95
- SUZUKI DR-Z400S 00-09
- SUZUKI DR-Z400SM 00-09
- YAMAHA DT200WR 91-94
- YAMAHA Lanza (DT230) 97-99
- ...和更多.
Overall good product. Shipping took abt 1 week. Came with instructions manual and easy to refer to. Happy with the purchase.阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
The Bolt that came with it is too short, so I had to prepare it separately.The Bolt that came with it is 50mm and I need another 15mm for WR, 70mm is too long so I went with 60mm.Probably it would hav...阅读更多 - 符合:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...和更多.
The price is a little expensive and it may be a modest part, but it is well made and the ZETA mark is high quality.This is a very large and powerful item that complements the Hand guard's defensive ca...阅读更多