- 符合:
- KAWASAKI Z1000 (air-cooled) 82-84
- KAWASAKI Z1100GP 82-84
- KAWASAKI Z1100 (KZ) 82-84
- KAWASAKI Z1100R 82-84
- KAWASAKI Z1100GP 82-84 J
Great quality product and superb finish. Have yet to install these, so can't say how good the fitment is to the original
Shipment was super fast and only down side was the import duties which can'...阅读更多 - 符合:
- KAWASAKI Z1R-1 77-78 (all models)
- KAWASAKI Z750 77-78 D1 (Gibbon type)
- KAWASAKI KZ1000 77-78 A1/A2 (Gibbon type)
If you read the description, you will understand unless you are too stupid to understand.阅读更多 - 符合:
- KAWASAKI Z800 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI 750SS Mach IV (H2) 71-
There is no snagging, etc., and it works normally.I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and d...阅读更多 - 符合:
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
You can taste the effect, but be careful because Tandem is deprecated!I feel like I can tandem it, since it doesn't seem to lack strength from what I can see, but…It would be nice to be able to taste ...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Well, it's like this ….It's just right for Refresh for now!阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z900 (KZ900) 72-80
- ...和更多.
I was disappointed because the design of the product was different from the picture, and the lock washer can only be used with OEM Type.After all, there is no Lock washer, so it is not yet ready to ru...阅读更多 - 符合:
- KAWASAKI Z1000 MkII
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z1000 (air-cooled) A1
- KAWASAKI Z1000 (air-cooled) A2
- KAWASAKI Z750 (air-cooled) A4
- ...和更多.
I just had those installed on my 1980 Kawasaki 1000MKII and love them. They feel great and have that retro pattern to them.阅读更多 - 符合:
- KAWASAKI Z1000 (air-cooled) 72-78
- KAWASAKI Z1-R/Z1-RII 72-78
- KAWASAKI Z1 (900SUPER4) 72-78
- KAWASAKI Z1000 (air-cooled) 72-78
The raised edge prevents leakage.阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I have often used Tie Wrap, but I had to cut it off and use a new one every time, so I bought it. I am glad I bought it, even though it seems rather expensive.阅读更多 - 符合:
- KAWASAKI Z1-R/Z1-RII 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI Z2 (750RS/Z750FOUR) 72-80
- ...和更多.
If you use it well, it will not leak oil as much as the OEM type rubber ones. if you degrease the BALI and apply the liquid gas well, and if you reuse it, you can use it almost permanently by removing...阅读更多 - 符合:
- KAWASAKI Z1000 (air-cooled) KZ A1
- KAWASAKI Z1000 (air-cooled) KZ A2
- KAWASAKI Z750 (air-cooled) A4
- KAWASAKI Z750 (air-cooled) A5
- KAWASAKI Z750 (air-cooled) D1
- ...和更多.
I tried to install it, but it was a simple installation with double-sided tape from the back, and I managed to install the left one, but it didn't fit tightly at all on the DOREMIRight SideSide cover.阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 76-79
- KAWASAKI Z750 (air-cooled) 76-79
- KAWASAKI Z1000 (air-cooled) 76-79
In the paper Float Gasket, the Gasoline is just leaking and the Material is here.:I bought the Rubber Packing. The price is high, but the effect is very large.阅读更多 - 符合:
- KAWASAKI Z1000 72-80
- KAWASAKI Z750 72-80
I bought this in January, but the carburetor would not go in at all, probably because it was hardened by the cold. Even after applying CRC or something to the insert, it won't go in. I wondered if the...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900) 76-80
- KAWASAKI
- KAWASAKI Z750 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80
- KAWASAKI Z900 (KZ900) 76-80
- ...和更多.
Electric wiring on older cars should be replaced as much as possible, including the 6V MONKEY/GORILLA Main Harness, Regulator, BatteryLEAD, Blinker harness, and Tail lamp.You never know when or where ...阅读更多 - 符合:
- KAWASAKI Z1000
- KAWASAKI Z1-R/Z1-RII 1
- KAWASAKI Z1000 (air-cooled) A2
- KAWASAKI Z1000 (air-cooled) A1
The Mounting Bolt hole did not fit and I had to cut about 1.5mm off the long hole side.The RegulatorBody is also very large, so I installed the Connector side upside down.It's in good working conditio...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Oil leak from Tachometer port is a common disease of air cooled Z.If it starts leaking, replace it with this one.The installation is a little hard, so apply more silicon grease and make sure to put it...阅读更多 - 符合:
- KAWASAKI Z1000A 76-78
- KAWASAKI Z900 76-78
- KAWASAKI Z1 72-75
- KAWASAKI Z1R 1 Type
- KAWASAKI Z2 72-75
- ...和更多.
I bought the Coil, Rotor, One way clutch and Rose because the price is not so different from the OEM type. The installation was easier than expected because there is a video of the installation on PMC...阅读更多 - 符合:
- KAWASAKI Z1-R/Z1-RII 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI Z2 (750RS/Z750FOUR) 72-80
- ...和更多.
The Rear Sets and Kick pedal interfere with each other, so I removed the Kick pedal and installed this Cap.I like it because it matches the overall Image of the vehicle.It may not be suitable for a NO...阅读更多 - 符合:
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z750FX
- KAWASAKI Z2 (750RS/Z750FOUR)
- KAWASAKI Z1000 MkII
- KAWASAKI Z1000
- ...和更多.
There are not many used LTDOEMFender's available anymore.I think it is good to use it as it is if you can bear the texture of the plating.I couldn't stand it.阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Purchased with Washer.Only Gasket is difficult to prevent from deteriorating.It is a necessity when replacing parts.To be honest, it would be a big help if you could stock only Gaskets by Manufacturer...阅读更多