- 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
The replacement of the Halogen bulb was very easy and took about 5 minutes to install.However, when actually illuminated, the light was not evenly distributed, making it sparse and very difficult to s...阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
I couldn't fix it, so I had to devise my own way to fix it.I don't know if brightness is an issue.阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
Since there is no Instruction Manual, I was a little confused. Since I didn't know what the right answer was, I managed to solve the problem in my own way, but even when I put it on, I didn't do any r...阅读更多 - 符合:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...和更多.
I put it on my A7. The rubber of the original footpeg was hard and slippery, and the gold part was badly corroded and dirty, so I decided to replace it with Other Brand Product.It looks similar to the...阅读更多 - 符合:
- KAWASAKI Varios 2 91-08
- KAWASAKI barios 91-08
- KAWASAKI Ninja 250R 08-09
- KAWASAKI Zephyr X 96-08
- KAWASAKI Zephyr 750RS 91-06
- ...和更多.
I was able to install it without any problems. It was fully compatible with the GPZ900R-A7's Normal step. The spring that came with it was Exactly, but the pin was too long, so I used the Normal sprin...阅读更多 - 符合:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...和更多.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive.阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
I saw the imp and thought it would be Large sturdy, so I bought it.It is only a little brighter than Halogen bulb.In addition, the Base and Body are fixed weakly by O-ring, so there is a fear that the...阅读更多 - 符合:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...和更多.
It can be installed on B type 9R without any problem, but it is difficult to install without removing the Upper Cowl because the Spring that holds the Valve interferes with the Heat sink during instal...阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
The Light is dark and I bought this to brighten it up a bit.It's not installed yet, but I'm hoping it will be.Since it was cheap, will it be as bright as expected?阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
Position will vary slightly.It's attached diagonally up and back.I thought it would be cooler if the bars were straight out wGood product for the price.I tried it out and I think the quality of the pr...阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
DIO110 (JF58) Attached toChange from Halogen bulb.Bottom line, I'm glad I switched.Amateur maintenance, first Valve replacement, about 1 hour work time.It takes a lot of time and effort to remove the ...阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
I put it on my CB125T JC06, but it was difficult to install because the inside of the light case was too narrow. It was difficult to install because the light case was too narrow. Also, because there ...阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
The Headlight's Waterproof Cap was mentioned as needing modification, but it could be installed without modification.The lighting situation is normal.You can't install it without removing the cowl and...阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I bought it for the ninja1000SX 2020.The OEM with Rubber does not have to transmit vibration.I bought it because it is too heavy and the bottom of Boots and the Rubber catches too much on each other.T...阅读更多 - 符合:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...和更多.
I bought it as a spare so that I don't have to worry about when it goes out because my current $3,000 LED is two years old.And you can't go wrong with any of the products listed on We-Big! This is why...阅读更多 - 符合:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...和更多.
It is written that it corresponds to H4 Valve, but it is inaccurate and it is not possible to install it without removing it to some extent with File, and it doesn't fit in the Headlight because it is...阅读更多 - 符合:
- KAWASAKI Ninja 250SL 15
- KAWASAKI Ninja 250 13
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
As a person who wears racing boots even when touring, I'm not a fan ofPedal is far from subtle in both Z250SL OEM footpegs.I've been wanting to do this before, just for a minute.I found this one and s...阅读更多 - 符合:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...和更多.
I bought it in a hurry because it was time for the webikePoint to expire, and another blinker that didn't show any signs of collapsing on its prop began to break down, so I thought it might, so I was ...阅读更多 - 符合:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...和更多.
I wanted a brighter headlight with the old VMAX, so I decided to use Multi-reflector and Large diameter head, but I wanted a brighter light with the current appearance and aimed for LED.I tentatively ...阅读更多 - 符合:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...和更多.
I've been interested in it for a while, so I bought it to try it out! 。 Since there is a Large heat sink compared to the Halogen bulb, you can avoid it and use it as a heat sink Quantity lock Bracket:...阅读更多