NGK Moto DX 火星塞 CPR8EDX-9S 95321
It is used in PCX125 JF28.I replaced the Iridium plugs with MotoDXPlug, but there was no change that I could feel.The MotoDXPlug can be used for 8,000 to 10,000 km, so it might be more cosier than Iridium plugs.
 |  |  |
 |  |  |
 |  |  |
 | ||
-
| 移位 | 149 | 发动机(引擎)类型 | - |
| 最大输出马力（ps） | 15PS/8,500rpm | 最大扭力(转矩)（kgf / m） | 1.4kg・m/6,500rpm |
| 车重（干重） | - | 油箱容量 升 | 8 |
NGK Moto DX 火星塞 CPR8EDX-9S 95321
It is used in PCX125 JF28.I replaced the Iridium plugs with MotoDXPlug and there was no change that I could feel.It's more expensive than Iridium plugs, but the MotoDXPlug is probably better from a cosmetic standpoint since it can be used for 8,000 to 10,000 kilos.
KIJIMA 安全帽锁
I bought the Z125PRO Helmet holder because it was difficult to use.There's another motivation for the purchase, and that's the ability to share a vehicle key! That's the point.If you have File and Precision Driver, you can make it common with the vehicle key.The rest of the time, if you have Tweezer...
Asahi windshield 把手护弓
The good thing is that it can be installed at the same time as the pcx Body Mount Shield.The Right Side doesn't interfere with the shields, but the Left Side hits when fully locked, soIt is Minus in that respect.I wish the bottom side was a little larger, but it is OK because I can avoid the wind an...
ENDURANCE 中高风镜
I managed to install it, but it interfered with the Cowl no matter how you adjust the position of the Screen. It is.Also, you have to drill the holes.It's a shame, because Design is good.
KITACO 排气管垫片2个入
I used it to replace the exhaust system on my SUPER CUB110 JA07.The original OEM Product seemed to be usable as is, but I prepared it anyway, so I replaced it!The accuracy of the mouth of Exhaust System was a little bad, but it was installed well without exhaust leak. I could.
KITACO 普利珠组
For those of you who are wondering how to choose a weight rollerThere are various weights available from various companies, so I chose this one based on Net Information and Brand.The acceleration and extension are both good.The OEM felt abnormal and replaced it early and it was deformed and cracked ...
ZETA 主缸盖
Even though I've done a lot of dress-up in other parts of the car, the standard front brake The reserver cover was not replaced. Naturally the choice of the color is Gold. There was also a bolt replacement type, but the overall design was not so good. I thought it was unreasonably expensive, but I'm...
World Walk 可调式 SF Style 后照镜
TANAX single-supported Mirror was replaced by vibration.According to the other imprecisions, the range of motion of the upper and lower parts is narrow, so I used the 20mm UPAdapter of TANAX. Use. In addition, if you lower the lever of Brake and Clutch a few millimeters, it is the best position. to....
(4.0)
