- 符合:
- HONDA NC700S 12-13 RC61 NC700DCT (MT vehicle)
- HONDA NC700S 12-13 RC61 (MT vehicle)
- HONDA GL1500GOLD WING 90-01 SC22 SE
- HONDA GB250 CLUBMAN 95-99 MC10 (1500001-)
- HONDA CBR600RR 03-12 PC37|40
- ...和更多.
기존에 바이크의 컨셉과는 전혀 다른 마스터 실린더 커버가 달려있었다. 이는 심미적이지도, 기능적이지도 못했는데, 굳이 이것을 계속 장착하고 있을 이유가 없었다. 그래서 새로이 장착하기로 마음먹고 위바이크에서 검색했다. 이런 좋은 제품을 찾아낸것에 감사해하며 미리 여붘도 사놔야겠다.阅读更多 - 符合:
- SUZUKI ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
- SUZUKI ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
- SUZUKI RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- ...和更多.
Timing was not available for Tommaselli, so I bought it in timeThe looks and Position are great, but … it won't pass inspection. w阅读更多 - 符合:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...和更多.
As always the package reached on time. Tool is very light and serves it purpose. Quality and craft of tool is great and will stand for a long period of time. Great product and recommended to have.阅读更多 - 符合:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...和更多.
[How is it used?I changed XJR400R from OEM Handlebar to this Condor Handle.Was the one you received as per Image?The precision of the construction is good and the shape is cool.Was the installation di...阅读更多 - 符合:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...和更多.
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the gri...阅读更多 - 符合:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...和更多.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used...阅读更多 - 符合:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...和更多.
I replaced Handlebar to immeChain.The height of the handlebar is now much lower.It's so much easier to ride.阅读更多 - 符合:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...和更多.
I put it on my st250, but the OEM handlebar made me look awkward when riding.The quality is not luxurious, but it feels solid!阅读更多 - 符合:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...和更多.
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...阅读更多 - 符合:
- KAWASAKI ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- KAWASAKI ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- HONDA NC700S 12 (Excluding ABS and DCT models)*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
- YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- ...和更多.
[How is it used?I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!Was the one you received as per Image?While slightly lower than OEM, n...阅读更多 - 符合:
- YAMAHA MT03
- HONDA CB500X
- YAMAHA BRONCO 97-99 5BT
- YAMAHA XG250 TRICKER 04-16 DG16J
- YAMAHA XG250 TRICKER 04-16 DG10J
- ...和更多.
I used it on my MT-03.It can be installed without any problem.Because I used it in combination with EZ-FIT BAR this time.Throttle Cable is no longer delivered.In this case, it can be processed or long...阅读更多 - 符合:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...和更多.
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am g...阅读更多 - 符合:
- KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
- KAWASAKI W400 *Required Switch Hole Drilled
- KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
- HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
- HONDA HORNET250 *Need to drill switch hole
- ...和更多.
I reverse engineered it on my XJR1300.I was not satisfied with the position and appearance of the Tommaselli separate handlebar I had previously installed, so I changed to a Pipe Handlebar.This was th...阅读更多 - 符合:
- HONDA 400X 13-15 NC47
- HONDA CB1000 SF (Big One) 92-98 SC30
- HONDA CB1100 10-21 SC65
- HONDA CB1100 EX 10-21 SC65
- HONDA CB1100 RS 17-21 SC65
- ...和更多.
Is it good that it's so easy to install? It's easy to install.阅读更多 - 符合:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...和更多.
When I tried to make a hole without using Hole Guide before, I couldn't make a hole well, but I can make a hole well by using this Hole Guard.阅读更多 - 符合:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...和更多.
The installation was no problem and I like using it without feeling any fatigue.阅读更多 - 符合:
- HONDA CB1100 -12 SC65 (Uphan model)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- ...和更多.
I didn't like the wide handlebar of NORMAL, so I tried the standard Conti2 but it didn't fit me and I felt stress. It is not a special model of car, so the wires are still OEM and Large, but I had to ...阅读更多 - 符合:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...和更多.
这个车把比原厂的车把窄了不少,另外,原厂的那个车把真得好重,这个则要轻很多。然后这个车把他不像原厂的车把有往回弯的那样,所以整个骑行的姿势会往前稍稍前倾一些,而原来的姿势是直直的坐着,相比较而言我还是更喜欢这个姿势,腰部会更舒服一些。车把短了有一些别的问题,national cycle的这个挡风适配不如原来的车把好了。
------------------------------------...阅读更多 - 符合:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
- HONDA FTR223 (with side numbers) *Processing of switch holes required
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- ...和更多.
It is easier to work with CenterMark for positioning and Memory for angle adjustment, butI was able to work with BrandSeal as a landmark.阅读更多 - 符合:
- HONDA 400X 13-15 NC47
- HONDA CB1000 SF (Big One) 92-98 SC30
- HONDA CB1100 10-21 SC65
- HONDA CB1100 EX 10-21 SC65
- HONDA CB1100 RS 17-21 SC65
- ...和更多.
I replaced the rubber of NORMAL because it was worn out.I loved the look and feel of the hosel.阅读更多