MINIMOTO 头灯
Very cheap quality. Inside tab that holds the lens in place broke. Not even. 100 kilometers on the thing. If minimoto sees this. I would like a replacement
 |  |  |
 |  |  |
在1967年发布的第一个模型*“猴子Z 50 M”的彩色图像之后，采用了一个专用的三维标志和一个适合纪念模型的主键。燃料罐侧和侧盖用珍珠色的白色为主要颜色，前面和后方的挡泥板颜色为shasta white。 除了车架、前叉、摆臂等，车顶灯箱和油箱顶部的条纹都是大红色的，座椅采用了模仿原始模型的时尚的检查模式座椅。 也在50周年的纪念版本中,翼转载的马克徽章设计安排的燃料箱,纪念贴纸安排上面,一个50周年徽章侧盖,一个50周年标志后面的座位,50周年纪念给主键,这是一个模型,该模型满足占有的感觉充满了特殊的感情。 *国内大规模生产商用车辆。
| 移位 | 49 | 发动机(引擎)类型 | AB28E/Air-cooled/4-stroke/OHC/Single Cylinder |
| 最大输出马力（ps） | 3.4PS/8,500rpm | 最大扭力(转矩)（kgf / m） | 0.35kgf・m/5,000rpm |
| 车重（干重） | - | 油箱容量 升 | 4.3 |
GM-MOTO 后扶手 Type B 只有扶手本体
It's only useful for lifting Rear.If there is a BALI or Seat Bracket, you may need to cut it.
KITACO 气门挺杆调整扳手
Useful tool, works with 8mm and 9mm adjustment nuts, and 2 types of adjustment screws.It is a handy tool and works with 8mm and 9mm Adjustment Nut and two types of Adjustment Screw.
TANAKA TRADING 电镀后土除
It's made of plastic, so I thought it would be about the same.It is easy to drill holes.
HONDA 指示灯
I don't know what speed the GEAR of the first CROSS CUB is in, so Quantity:2pc. I bought a Set and use it to identify the first speed and Top. Because a special product is expensive.I'm not sure, but I also installed the Coupler It was easy to take it apart and plug it straight into the place where ...
SP TAKEGAWA (Special Parts TAKEGAWA) 油压离合器外盖套件
I bought this because I wanted to try to hydraulicize the Clutch.The installation was done Smoothly.The NORMAL ClutchStopper Pin position seems to be a hassle.I'm looking forward to seeing it when it's finished as I'm only installing it.
KITACO 前齿盘
420 SizeDownConversion from 428 Size of NORMAL to 420 SizeDownConversion using Seal chain. 16T was selected for 125cc Bore up and Rear was 36T.
(4.0)
