- 符合:
- BMW R1100S 96-11 Rear Qty:1 Caliper
- BMW R1100S 01-05 Without Integral ABS Rear Qty:1 Caliper
- BMW R1100S Without Integral ABS 01-05 Rear
- capacity:1 caliper
- BMW R1100S With Integral ABS 01-06 Rear
- ...和更多.
Resin was chosen for its aggressiveness to DISC.It stops firmly, so the braking ability is not a problem, but I felt it was losing power quite quickly.However, unlike the Metal pad, I think it's less ...阅读更多 - 符合:
- BMW A40 (-)
- BMW A67 05-05
- BMW A73 (-)
- BMW C400X K09 18-18
- BMW HP K25 04-08
- ...和更多.
I don't mind.I just hope that Webike will continue to handle OEM Products. wI'd rather buy from a Dealer with the Points I've saved up? I would like to purchase at a discount.阅读更多 - 符合:
- BMW
The wind is hard when I drive on the highway, and that's why I got this product.The Instruction Manual in Italian is unintelligible, so what is it about? State of WA photo of the installation was post...阅读更多 - 符合:
- BMW RnineT Scrambler
- BMW RnineT Urban G/S
- BMW S1000XR -19
- BMW RnineT /5
- BMW RnineT Pure
- ...和更多.
This adapter makes it possible to install the UniversalBlinker in the OEM position on BMW vehicles.There are similar products available from other companies, but Material:Many of the plastic ones are ...阅读更多 - 符合:
- その他 VR250 Super
- Otard 99
- その他 VR250 Enduro 99
- その他 Scrambler 09-14
- その他 Off Road Caliper P2 28 (Code XQ21361) BREMBO Front Number of units: 1 caliper (2 sets required)
- ...和更多.
I searched for a product that fits BMW K1300S, and VD-947JL was displayed, so I bought it. The part number of OEM pad for K1200S, K1200R, K1300S, and K1300R is the same, and the part number for K1300S...阅读更多 - 符合:
- BMW S1000XR 14-20 K49
- BMW S1000RR 08-16 K46
- BMW S1000R 13-16 K47
- BMW R900 RT K26 05-13
- BMW R850RT 96-01 259
- ...和更多.
I use it on my R nineT.Whenever you change the oil, you should change the gasket as well.It's inexpensive and I will be using this product next time around.阅读更多 - 符合:
- その他 VR250 Super
- Otard 99
- その他 VR250 Enduro 99
- その他 Scrambler 09-14
- その他 Off Road Caliper P2 28 (Code XQ21361) BREMBO Front Number of units: 1 caliper (2 sets required)
- ...和更多.
[How is it used?I used it for EnduroMachine.I'm still using it.How was your experience with it?I used it on my Enduro for 8 hours and it worked decently even on steep hills.Excellent cost-per-performa...阅读更多 - 符合:
- BMW F900GS Adventure 23-
- BMW F800R 15-
- BMW F850GS 18-
- BMW F850GS Adventure 19-
- BMW F900GS 23-
- ...和更多.
It was very bad even though it was a Manufacturer's product called Wonderlich, the mirror was cut all the way around and glaringly.Anyway, when I installed it and scratched the Engine, the whole Mirro...阅读更多 - 符合:
- BMW R1200RT 06 1170 - All
- BMW R1200RT 07 1170 - All
- BMW R1200RT 08 1170 - All
- BMW R1200RT 09 1170 - All
- BMW R1200RT 10 1200 - All
- ...和更多.
Good, no problem at all for Oil Filter function.There are two things that make me personally happy.One is that the tip has a protrusion so that it can be turned with a 17mm Wrench.The other is that it...阅读更多 - Tire that makes Corner fun, and the heat is good enough to keep you safe!阅读更多
- It's the look after all!It's cool!I just can't see it. You can't see it unless you want to see it.(I may not be able to react to the White Motorcycle coming up behind me...)It just has to be cool.Driv...阅读更多
- Mirror for DUCATI is made in Italy.It's pricey, but it's cool and doesn't interfere with the design of the motorcycle!阅读更多
- I'm sure you're worried about interference with the Reserve tank.It can be installed with Limit.If you are worried about interference, you can put a 3mm Spacer between them.阅读更多
- rizoma TOMOK Made in ItalyCNC machined MirrorThe Mirror is ridiculously expensive, but the design makes up for it.The visibility range is narrow because the Mirror is small, but it is no problem for a...阅读更多
- The car has been driven 2500 km since installation.Grip is not high, but it is not habitual and is stable.It has 2500km on it so it hasn't been reduced yet so you can expect a good life.I also think i...阅读更多
- 符合:
- BMW S1000XR 20-
- BMW S1000XR -19
- BMW S1000RR 19-
- BMW S1000RR 17-18
- BMW S1000RR 15-16
- ...和更多.
I came to purchase the OEM Drain bolt because it was nerfed. This is the only one in stock that fits the Webike and it was a bit expensive. If it's a domestic product, there might be cheaper ones, but...阅读更多 - It was installed on a 2009 XR1200. The rainy weather and Dry are both quite good grips, and the sense of grounding and LineTrace freedom is higher than the OEM's Quarry Fire Yards, and if the Front is...阅读更多
- 符合:
- BMW S1000XR 14-20 K49
- BMW S1000RR 08-16 K46
- BMW S1000R 13-16 K47
- BMW R900 RT K26 05-13
- BMW R850RT 96-01 259
- ...和更多.
It's a good product with no problems.It doesn't feel particularly cheap and is safe to use.It's a trustworthy brand, and it's a good cosmetic brand as well.I will continue to use it in the future.阅读更多 - 符合:
- BMW R1200ST 1170cc All 07
- BMW S1000RR 990cc All 09
- BMW R900RT 900cc All 05
- BMW R1200S 1170cc All 07
- BMW R1200ST 1170cc All 06
- ...和更多.
I was able to install it without any problems.I don't know what it feels like to use it.However, I will continue to use it because it is a reliable brand and a good cosmetic product.阅读更多 - You're breathing too much air! It spins like crazy above 3,000 RPMs, but below 2,500 RPMs it's really bad! Idling also produces vibrations. 。 I bought an OEM right away.阅读更多